asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	ca3c22c5f1	Scope Tracing: A new facility for tracing scope enter/exit What's wrong with ast_debug? ast_debug is fine for general purpose debug output but it's not really geared for scope tracing since it doesn't present its output in a way that makes capturing and analyzing flow through Asterisk easy. How is scope tracing better? Scope tracing uses the same "cleanup" attribute that RAII_VAR uses to print messages to a separate "trace" log level. Even better, the messages are indented and unindented based on a thread-local call depth counter. When output to a separate log file, the output is uncluttered and easy to follow. Here's an example of the output. The leading timestamps and thread ids are removed and the output cut off at 68 columns for commit message restrictions but you get the idea. --> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 --> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 --> res_pjsip_session.c:3669 handle_incoming_response PJSIP/ --> chan_pjsip.c:3265 chan_pjsip_incoming_response_after --> chan_pjsip.c:3194 chan_pjsip_incoming_response P chan_pjsip.c:3245 chan_pjsip_incoming_respon <-- chan_pjsip.c:3194 chan_pjsip_incoming_response P <-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after <-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/ <-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 <-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 The messages with the "-->" or "<--" were produced by including the following at the top of each function: SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session)); Scope isn't limited to functions any more than RAII_VAR is. You can also see entry and exit from "if", "for", "while", etc blocks. There is also an ast_trace() macro that doesn't track entry or exit but simply outputs a message to the trace log using the current indent level. The deepest message in the sample (chan_pjsip.c:3245) was used to indicate which "case" in a "select" was executed. How do you use it? More documentation is available in logger.h but here's an overview: * Configure with --enable-dev-mode. Like debug, scope tracing is #ifdef'd out if devmode isn't enabled. * Add a SCOPE_TRACE() call to the top of your function. * Set a logger channel in logger.conf to output the "trace" level. * Use the CLI (or cli.conf) to set a trace level similar to setting debug level... CLI> core set trace 2 res_pjsip.so Summary Of Changes: * Added LOG_TRACE logger level. Actually it occupies the slot formerly occupied by the now defunct "event" level. * Added core asterisk option "trace" similar to debug. Includes ability to specify global trace level in asterisk.conf and CLI commands to turn on/off and set levels. Levels can be set globally (probably not a good idea), or by module/source file. * Updated sample asterisk.conf and logger.conf. Tracing is disabled by default in both. * Added __ast_trace() to logger.c which keeps track of the indent level using TLS. It's #ifdef'd out if devmode isn't enabled. * Added ast_trace() and SCOPE_TRACE() macros to logger.h. These are all #ifdef'd out if devmode isn't enabled. Why not use gcc's -finstrument-functions capability? gcc's facility doesn't allow access to local data and doesn't operate on non-function scopes. Known Issues: The only know issue is that we currently don't know the line number where the scope exited. It's reported as the same place the scope was entered. There's probably a way to get around it but it might involve looking at the stack and doing an 'addr2line' to get the line number. Kind of like ast_backtrace() does. Not sure if it's worth it. Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027	5 years ago
Joshua C. Colp	fe07093660	stasis: Add statistics gathering in developer mode. This change adds statistics gathering to Stasis topics, subscriptions, and message types. These can be viewed using CLI commands and provide insight into how Stasis is used and how long certain operations take to execute. These are only available when Asterisk is compiled in developer mode and do not have any impact under normal operation. ASTERISK-28117 Change-Id: I94411b53767f89ee01714daaecf0c2f1666e863f	6 years ago
Corey Farrell	040bb21771	core: Remove additional symbols. Remove symbols that are depreacated and replaced: * ast_channel_datastore_alloc * ast_channel_datastore_free * ast_channel_cmpwhentohangup * ast_channel_setwhentohangup * config_text_file_save * devstate2str * ast_device_state_changed * ast_device_state_changed_literal * ast_verbose_get_by_module Remove unused symbols: * channelreloadreason2txt (last used in Asterisk 12). Remove unused ast_options flags: * AST_OPT_FLAG_END_CDR_BEFORE_H_EXTEN / ast_opt_end_cdr_before_h_exten * AST_OPT_FLAG_VERBOSE_MODULE / ast_opt_verb_module * AST_OPT_FLAG_INITIATED_SECONDS Change-Id: I841255995d195f8efc1ed47af9c7a2f131c08645	7 years ago
Corey Farrell	de77cf8698	core: Remove dead symbols from asterisk.exports.in. * dahdi_chan_name * dahdi_chan_name_len * dahdi_chan_mode * __manager_event * dialed_interface_info Added comment about __progname and environ being needed for FreeBSD to prevent accidental removal in the future. Change-Id: I3ae026bc541cd9cb572be2ffa95fc359547642b5	7 years ago
George Joseph	e61716b774	pjproject_bundled: Various fixes discovered during testing of OSes For all OSes: * Disabled third-party codecs in pjproject and added '--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the configure options since we don't use the pjsip codec capability. FreeBSD: * Added FreeBSD support to install_prereq. * Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make". * Added __progname and environ to asterisk.exports.in. * Reverted the use of ldconfig to create shared library symlinks to ln. * Only enable epoll in pjproject if `uname -s` is Linux. * Added a patch to pjproject to take the name of the 'make' command from an environment variable if supplied. This is needed for the python bindings. (merged by Teluu into pjproject trunk 5/3/2016) FreeBSD support isn't complete. Still some general issues regarding make/gmake having nothing to do with pjproject. With some handholding it DOES build successfully. CentOS: Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH. CentOS 6/7 32/64 build and run the pjsip testsuite successfully. Ubuntu: No changes required. Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully. Debian: No changes required. Debian 6/7/8 32/64 build and run the pjsip testsuite successfully. There will utimately be a follow-up patch to create an install_prereq for the testsuite as I've discovered a few missing requirements. ASTERISK-25968 #close Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c	9 years ago
Walter Doekes	80edcdcc45	Add _IO_stdin_used in version-script to fix SIGBUSes on Sparc. The --version-script,asterisk.exports linker flag (and the module exports) didn't provide _IO_stdin_used in the list of exported symbols. That causes some kind of libc compatibility mode to kick in, where stdio file structures (stdout/stderr) land somewhere else. In the case of the Sparc, they landed on misaligned memory. This became apparent first after r376428 (Reorder startup sequence) when a lot of ast_log's were replaced with fprintf's. Writing to stderr triggered a SIGBUS. (Compared to x86 and amd64 architectures, the Sparc is very picky about memory alignment.) (issue ASTERISK-21763) (issue ASTERISK-21665) Reported by: Jeremy Kister Review: https://reviewboard.asterisk.org/r/2760/ ........ Merged revisions 397377 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 397378 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397379 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	f9d40917da	Export exports.in as well Because is is rather needed. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395298 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	4edd8be35c	This patch adds a new message bus API to Asterisk. For the initial use of this bus, I took some work kmoore did creating channel snapshots. So rather than create AMI events directly in the channel code, this patch generates Stasis events, which manager.c uses to then publish the AMI event. This message bus provides a generic publish/subscribe mechanism within Asterisk. This message bus is: - Loosely coupled; new message types can be added in seperate modules. - Easy to use; publishing and subscribing are straightforward operations. In addition to basic publish/subscribe, the patch also provides mechanisms for message forwarding, and for message caching. (issue ASTERISK-20887) (closes issue ASTERISK-20959) Review: https://reviewboard.asterisk.org/r/2339/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382685 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Terry Wilson	d54717c39e	Add new config-parsing framework This framework adds a way to register the various options in a config file with Asterisk and to handle loading and reloading of that config in a consistent and atomic manner. Review: https://reviewboard.asterisk.org/r/1873/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368181 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Tilghman Lesher	296a898edb	Merged revisions 288640 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r288640 \| tilghman \| 2010-09-23 22:42:37 -0500 (Thu, 23 Sep 2010) \| 2 lines Export timersub for platforms which do not have it ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288641 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Terry Wilson	857814f435	Add SRTP support for Asterisk After 5 years in mantis and over a year on reviewboard, SRTP support is finally being comitted. This includes generic CHANNEL dialplan functions that work for getting the status of whether a call has secure media or signaling as defined by the underlying channel technology and for setting whether or not a new channel being bridged to a calling channel should have secure signaling or media. See doc/tex/secure-calls.tex for examples. Original patch by mikma, updated for trunk and revised by me. (closes issue #5413) Reported by: mikma Tested by: twilson, notthematrix, hemanshurpatel Review: https://reviewboard.asterisk.org/r/191/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Kevin P. Fleming	2be88e05c0	Allow symbol export filtering to work properly on platforms that have symbol prefixes. Some platforms prefix externally-visible symbols in object files generated from C sources (most commonly, '_' is the prefix). On these platforms, the existing symbol export filtering process ends up suppressing all the symbols that are supposed to be left visible. This patch allows the prefix string to be supplied to the top-level Makefile in the LINKER_SYMBOL_PREFIX variable, and then generates the linker scripts as required to include the prefix supplied. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255906 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago

12 Commits (master)