5395 Commits (20.2)

Author	SHA1	Message	Date
Mike Bradeen	f8dfbaf225	res_pjsip_pubsub: subscription cleanup changes ... There are two main parts of the change associated with this commit. These are driven by the change in call order of pubsub_on_rx_refresh and pubsub_on_evsub_state by pjproject when an in-dialog SUBSCRIBE is received. First, the previous behavior was for pjproject to call pubsub_on_rx_refresh before calling pubsub_on_evsub_state when an in-dialog SUBSCRIBE was received that changes the subscription state. If that change was a termination due to a re-SUBSCRIBE with an expires of 0, we used to use the call to pubsub_on_rx_refresh to set the substate of the evsub to TERMINATE_PENDING before pjproject could call pubsub_on_evsub_state. This substate let pubsub_on_evsub_state know that the subscription TERMINATED event could be ignored as there was still a subsequent NOTIFY that needed to be generated and another call to pubsub_on_evsub_state to come with it. That NOTIFY was sent via serialized_pubsub_on_refresh_timeout which would see the TERMINATE_PENDING state and transition it to TERMINATE_IN_PROGRESS before triggering another call to pubsub_on_evsub_state (which now would clean up the evsub.) The new pjproject behavior is to call pubsub_on_evsub_state before pubsub_on_rx_refresh. This means we no longer can set the state to TERMINATE_PENDING to tell pubsub_on_evsub_state that it can ignore the first TERMINATED event. To handle this, we now look directly at the event type, method type and the expires value to determine whether we want to ignore the event or use it to trigger the evsub cleanup. Second, pjproject now expects the NOTIFY to actually be sent during pubsub_on_rx_refresh and avoids the protocol violation inherent in sending a NOTIFY before the SUBSCRIBE is acknowledged by caching the sent NOTIFY then sending it after responding to the SUBSCRIBE. This requires we send the NOTIFY using the non-serialized pubsub_on_refresh_timeout directly and let pjproject handle the protocol violation. ASTERISK-30469 Change-Id: I05c1d91a44fe28244ae93faa4a2268a3332b5fd7	2 years ago
Sean Bright	6e50550d28	Revert "pbx_ael: Global variables are not expanded." ... This reverts commit 56051d1ac5. Reason for revert: Behavior change that breaks existing dialplan. ASTERISK-30472 #close Change-Id: I83bed3b800d36228a04ded0a6164b795f7f16bd6	2 years ago
George Joseph	ceda5a9859	res_pjsip: Replace invalid UTF-8 sequences in callerid name ... * Added a new function ast_utf8_replace_invalid_chars() to utf8.c that copies a string replacing any invalid UTF-8 sequences with the Unicode specified U+FFFD replacement character. For example: "abc\xffdef" becomes "abc\uFFFDdef". Any UTF-8 compliant implementation will show that character as a � character. * Updated res_pjsip:set_id_from_hdr() to use ast_utf8_replace_invalid_chars and print a warning if any invalid sequences were found during the copy. * Updated stasis_channels:ast_channel_publish_varset to use ast_utf8_replace_invalid_chars and print a warning if any invalid sequences were found during the copy. ASTERISK-27830 Change-Id: I4ffbdb19c80bf0efc675d40078a3ca4f85c567d8	2 years ago
cmaj	5b0e3444c3	res_phoneprov.c: Multihomed SERVER cache prevention ... Phones moving between subnets on multi-homed server have their initially connected interface IP cached in the SERVER variable, even when it is not specified in the configuration files. This prevents phones from obtaining the correct SERVER variable value when they move to another subnet. ASTERISK-30388 #close Reported-by: cmaj Change-Id: I1d18987a9d58e85556b4c4a6814ce7006524cc92	2 years ago
Mike Bradeen	37e558f6ef	res_pjsip: Prevent SEGV in pjsip_evsub_send_request ... contributed pjproject - patch to check sub->pending_notify in evsub.c:on_tsx_state before calling pjsip_evsub_send_request() res_pjsip_pubsub - change post pjsip 2.13 behavior to use pubsub_on_refresh_timeout to avoid the ao2_cleanup call on the sub_tree. This is is because the final NOTIFY send is no longer the last place the sub_tree is referenced. ASTERISK-30419 Change-Id: Ib5cc662ce578e9adcda312e16c58a10b6453e438	2 years ago
Mike Bradeen	58636a6ea6	res_pjsip: Upgraded bundled pjsip to 2.13 ... Removed multiple patches. Code chages in res_pjsip_pubsub due to changes in evsub. Pjsip now calls on_evsub_state() before on_rx_refresh(), so the sub tree deletion that used to take place in on_evsub_state() now must take place in on_rx_refresh(). Additionally, pjsip now requires that you send the NOTIFY from within on_rx_refresh(), otherwise it will assert when going to send the 200 OK. The idea is that it will look for this NOTIFY and cache it until after sending the response in order to deal with the self-imposed message mis-order. Asterisk previously dealt with this by pushing the NOTIFY in on_rx_refresh(), but pjsip now forces us to use it's method. Changes were required to configure in order to detect which way pjsip handles this as the two are not compatible for the reasons mentioned above. A corresponding change in testsuite is required in order to deal with the small interal timing changes caused by moving the NOTIFY send. ASTERISK-30325 Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f	2 years ago
Sean Bright	96d9ad51ac	doxygen: Fix doxygen errors. ... Change-Id: Ic50e95b4fc10f74ab15416d908e8a87ee8ec2f85	2 years ago
sungtae kim	f99849f8d5	res_stasis_snoop: Fix snoop crash ... Added NULL pointer check and channel lock to prevent resource release while the chanspy is processing. ASTERISK-29604 Change-Id: Ibdc675f98052da32333b19685b1708a3751b6d24	2 years ago
Sean Bright	56051d1ac5	pbx_ael: Global variables are not expanded. ... Variable references within global variable assignments are now expanded rather than being included literally. ASTERISK-30406 #close Change-Id: I136e8d6395e90a4c92d9777a46a7bc3edb08d05d	2 years ago
Naveen Albert	a1da8042d1	res_pjsip_session: Add overlap_context option. ... Adds the overlap_context option, which can be used to explicitly specify a context to use for overlap dialing extension matches, rather than forcibly using the context configured for the endpoint. ASTERISK-30262 #close Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db	2 years ago
George Joseph	2f5aece0c9	res_rtp_asterisk: Don't use double math to generate timestamps ... Rounding issues with double math were causing rtp timestamp slips in outgoing packets. We're now back to integer math and are getting no more slips. ASTERISK-30391 Change-Id: I6ba992b49ffdf9ebea074581dfa784a188c661a4	2 years ago
Igor Goncharovsky	3526441e41	res_pjsip_rfc3326: Add SIP causes support for RFC3326 ... Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850). ASTERISK-30319 #close Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645	2 years ago
George Joseph	4710f37ef6	res_rtp_asterisk: Asterisk Media Experience Score (MES) ... ----------------- This commit reinstates MES with some casting fixes to the functions in time.h that convert between doubles and timeval structures. The casting issues were causing incorrect timestamps to be calculated which caused transcoding from/to G722 to produce bad or no audio. ASTERISK-30391 ----------------- This module has been updated to provide additional quality statistics in the form of an Asterisk Media Experience Score. The score is avilable using the same mechanisms you'd use to retrieve jitter, loss, and rtt statistics. For more information about the score and how to retrieve it, see https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score * Updated chan_pjsip to set quality channel variables when a call ends. * Updated channels/pjsip/dialplan_functions.c to add the ability to retrieve the MES along with the existing rtcp stats when using the CHANNEL dialplan function. * Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed checks for debugging purposes. * Added several function to time.h for manipulating time-in-samples and times represented as double seconds. * Updated rtp_engine.c to pass through the MES when stats are requested. Also debug output that dumps the stats when an rtp instance is destroyed. * Updated res_rtp_asterisk.c to implement the calculation of the MES. In the process, also had to update the calculation of jitter. Many debugging statements were also changed to be more informative. * Added a unit test for internal testing. The test should not be run during normal operation and is disabled by default. Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038	2 years ago
George Joseph	62ca063fca	Revert "res_rtp_asterisk: Asterisk Media Experience Score (MES)" ... This reverts commit d454801c2d. Reason for revert: Issue when transcoding to/from g722 Change-Id: I09f49e171b1661548657a9ba7a978c29d0b5be86	2 years ago
George Joseph	24102ba236	res_pjsip_transport_websocket: Add remote port to transport ... When Asterisk receives a new websocket conenction, it creates a new pjsip transport for it and copies connection data into it. The transport manager then uses the remote IP address and port on the transport to create a monitor for each connection. However, the remote port wasn't being copied, only the IP address which meant that the transport manager was creating only 1 monitoring entry for all websocket connections from the same IP address. Therefore, if one of those connections failed, it deleted the transport taking all the the connections from that same IP address with it. * We now copy the remote port into the created transport and the transport manager behaves correctly. ASTERISK-30369 Change-Id: Ib506d40897ea6286455ac0be4dfbb0ed43b727e1	2 years ago
Holger Hans Peter Freyther	3d9b9a2b16	res_http_media_cache: Do not crash when there is no extension ... Do not crash when a URL has no path component as in this case the ast_uri_path function will return NULL. Make the code cope with not having a path. The below would crash > media cache create http://google.com /tmp/foo.wav Thread 1 "asterisk" received signal SIGSEGV, Segmentation fault. 0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6 (gdb) bt #0 0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6 #1 0x0000ffff43d43a78 in file_extension_from_string (str=<optimized out>, buffer=buffer@entry=0xffffca9973c0 "", capacity=capacity@entry=64) at res_http_media_cache.c:288 #2 0x0000ffff43d43bac in file_extension_from_url_path (bucket_file=bucket_file@entry=0x3bf96568, buffer=buffer@entry=0xffffca9973c0 "", capacity=capacity@entry=64) at res_http_media_cache.c:378 #3 0x0000ffff43d43c74 in bucket_file_set_extension (bucket_file=bucket_file@entry=0x3bf96568) at res_http_media_cache.c:392 #4 0x0000ffff43d43d10 in bucket_file_run_curl (bucket_file=0x3bf96568) at res_http_media_cache.c:555 #5 0x0000ffff43d43f74 in bucket_http_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>) at res_http_media_cache.c:613 #6 0x0000000000487638 in bucket_file_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>) at bucket.c:191 #7 0x0000000000554408 in sorcery_wizard_create (object_wizard=object_wizard@entry=0x3b9f0718, details=details@entry=0xffffca9974a8) at sorcery.c:2027 #8 0x0000000000559698 in ast_sorcery_create (sorcery=<optimized out>, object=object@entry=0x3bf96568) at sorcery.c:2077 #9 0x00000000004893a4 in ast_bucket_file_create (file=file@entry=0x3bf96568) at bucket.c:727 #10 0x00000000004f877c in ast_media_cache_create_or_update (uri=0x3bfa1103 "https://google.com", file_path=0x3bfa1116 "/tmp/foo.wav", metadata=metadata@entry=0x0) at media_cache.c:335 #11 0x00000000004f88ec in media_cache_handle_create_item (e=<optimized out>, cmd=<optimized out>, a=0xffffca9976b8) at media_cache.c:640 ASTERISK-30375 #close Change-Id: I6a9433688cb5d3d4be8758b7642d923bdde6c273	2 years ago
George Joseph	d454801c2d	res_rtp_asterisk: Asterisk Media Experience Score (MES) ... This module has been updated to provide additional quality statistics in the form of an Asterisk Media Experience Score. The score is avilable using the same mechanisms you'd use to retrieve jitter, loss, and rtt statistics. For more information about the score and how to retrieve it, see https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score * Updated chan_pjsip to set quality channel variables when a call ends. * Updated channels/pjsip/dialplan_functions.c to add the ability to retrieve the MES along with the existing rtcp stats when using the CHANNEL dialplan function. * Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed checks for debugging purposes. * Added several function to time.h for manipulating time-in-samples and times represented as double seconds. * Updated rtp_engine.c to pass through the MES when stats are requested. Also debug output that dumps the stats when an rtp instance is destroyed. * Updated res_rtp_asterisk.c to implement the calculation of the MES. In the process, also had to update the calculation of jitter. Many debugging statements were also changed to be more informative. * Added a unit test for internal testing. The test should not be run during normal operation and is disabled by default. ASTERISK-30280 Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a	2 years ago
Naveen Albert	c7598ee947	res_pjsip_session: Use Caller ID for extension matching. ... Currently, there is no Caller ID available to us when checking for an extension match when handling INVITEs. As a result, extension patterns that depend on the Caller ID are not matched and calls may be incorrectly rejected. The Caller ID is not available because the supplement that adds Caller ID to the session does not execute until after this check. Supplement callbacks cannot yet be executed at this point since the session is not yet in the appropriate state. To fix this without impacting existing behavior, the Caller ID number is now retrieved before attempting to pattern match. This ensures pattern matching works correctly and there is no behavior change to the way supplements are called. ASTERISK-28767 #close Change-Id: Iec7f5a3b90e51b65ccf74342f96bf80314b7cfc7	2 years ago
Ben Ford	881faf544f	res_pjsip_sdp_rtp.c: Use correct timeout when put on hold. ... When a call is put on hold and it has moh_passthrough and rtp_timeout set on the endpoint, the wrong timeout will be used. rtp_timeout_hold is expected to be used, but rtp_timeout is used instead. This change adds a couple of checks for locally_held to determine if rtp_timeout_hold needs to be used instead of rtp_timeout. ASTERISK-30350 Change-Id: I7b106fc244332014216d12bba851cefe884cc25f	2 years ago
Igor Goncharovsky	115a1b4f0a	res_pjsip: Fix path usage in case dialing with '@' ... Fix aor lookup on sip path addition. Issue happens in case of dialing with @ and overriding user part of RURI. ASTERISK-30100 #close Reported-by: Yury Kirsanov Change-Id: I3f2c42a583578c94397b113e32ca3ebf2d600e13	2 years ago
Alexandre Fournier	01b3962201	res_geoloc: fix NULL pointer dereference bug ... The `ast_geoloc_datastore_add_eprofile` function does not return 0 on success, it returns the size of the underlying datastore. This means that the datastore will be freed and its pointer set to NULL when no error occured at all. ASTERISK-30346 Change-Id: Iea9b209bd1244cc57b903b9496cb680c356e4bb9	2 years ago
Joshua C. Colp	b6855755ce	res_pjsip_aoc: Don't assume a body exists on responses. ... When adding AOC to an outgoing response the code assumed that a body would exist for comparing the Content-Type. This isn't always true. The code now checks to make sure the response has a body before checking the Content-Type. ASTERISK-21502 Change-Id: Iaead371434fc3bc693dad487228106a7d7a5ac76	2 years ago
Michael Kuron	fee9012fe1	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip ... chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	2 years ago
Joshua C. Colp	564349ff5d	ari: Destroy body variables in channel create. ... When passing a JSON body to the 'create' channel route it would be converted into Asterisk variables, but never freed resulting in a memory leak. This change makes it so that the variables are freed in all cases. ASTERISK-30344 Change-Id: I924dbd866a01c6073e2d6fb846ccaa27ef72d49d	2 years ago
Marcel Wagner	58534b309f	res_pjsip: Fix typo in from_domain documentation ... This fixes a small typo in the from_domain documentation on the endpoint documentation ASTERISK-30328 #close Change-Id: Ia6f0897c3f5cab899ef2cde6b3ac07265b8beb21	2 years ago
Naveen Albert	531eacd6c9	res_hep: Add support for named capture agents. ... Adds support for the capture agent name field of the Homer protocol to Asterisk by allowing users to specify a name that will be sent to the HEP server. ASTERISK-30322 #close Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b	2 years ago
Naveen Albert	0d6003fa9a	res_pjsip_session.c: Map empty extensions in INVITEs to s. ... Some SIP devices use an empty extension for PLAR functionality. Rather than rejecting these empty extensions, we now use the s extension for such calls to mirror the existing PLAR functionality in Asterisk (e.g. chan_dahdi). ASTERISK-30265 #close Change-Id: I0861a405cd49bbbf532b52f7b47f0e2810832590	2 years ago
Marcel Wagner	b83af13f65	res_pjsip: Update contact_user to point out default ... Updates the documentation for the 'contact_user' field to point out the default outbound contact if no contact_user is specified 's' ASTERISK-30316 #close Change-Id: I61f24fb9164e4d07e05908a2511805281874c876	2 years ago
Naveen Albert	80e6205bb0	res_adsi: Fix major regression caused by media format rearchitecture. ... The commit that rearchitected media formats, a2c912e997 (ASTERISK_23114) introduced a regression by improperly translating code in res_adsi.c. In particular, the pointer to the frame buffer was initialized at the top of adsi_careful_send, rather than dynamically updating it for each frame, as is required. This resulted in the first frame being repeatedly sent, rather than advancing through the frames. This corrupted the transmission of the CAS to the CPE, which meant that CPE would never respond with the DTMF acknowledgment, effectively completely breaking ADSI functionality. This issue is now fixed, and ADSI now works properly again. ASTERISK-29793 #close Change-Id: Icdeddf733eda2981c98712d1ac9cddc0db507dbe	2 years ago
Naveen Albert	406143ae61	res_pjsip_header_funcs: Add custom parameter support. ... Adds support for custom URI and header parameters in the From header in PJSIP. Parameters can be both set and read using this function. ASTERISK-30150 #close Change-Id: Ifb1bc3c512ad5f6faeaebd7817f004a2ecbd6428	2 years ago
George Joseph	7684c9e907	pjsip_transport_events: Fix possible use after free on transport ... It was possible for a module that registered for transport monitor events to pass in a pjsip_transport that had already been freed. This caused pjsip_transport_events to crash when looking up the monitor for the transport. The fix is a two pronged approach. 1. We now increment the reference count on pjsip_transports when we create monitors for them, then decrement the count when the transport is going to be destroyed. 2. There are now APIs to register and unregister monitor callbacks by "transport key" which is a string concatenation of the remote ip address and port. This way the module needing to monitor the transport doesn't have to hold on to the transport object itself to unregister. It just has to save the transport_key. * Added the pjsip_transport reference increment and decrement. * Changed the internal transport monitor container key from the transport->obj_name (which may not be unique anyway) to the transport_key. * Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that fills a buffer with the transport_key using a passed-in pjsip_transport. * Added the following functions: ast_sip_transport_monitor_register_key ast_sip_transport_monitor_register_replace_key ast_sip_transport_monitor_unregister_key and marked their non-key counterparts as deprecated. * Updated res_pjsip_pubsub and res_pjsip_outbound_register to use the new "key" monitor functions. NOTE: res_pjsip_registrar also uses the transport monitor functionality but doesn't have a persistent object other than contact to store a transport key. At this time, it continues to use the non-key monitor functions. ASTERISK-30244 Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b	2 years ago
Maximilian Fridrich	60b81eabe0	core & res_pjsip: Improve topology change handling. ... This PR contains two relatively separate changes in channel.c and res_pjsip_session.c which ensure that topology changes are not ignored in cases where they should be handled. For channel.c: The function ast_channel_request_stream_topology_change only triggers a stream topology request change indication, if the channel's topology does not equal the requested topology. However, a channel could be in a state where it is currently "negotiating" a new topology but hasn't updated it yet, so the topology request change would be lost. Channels need to be able to handle such situations internally and stream topology requests should therefore always be passed on. In the case of chan_pjsip for example, it queues a session refresh (re-INVITE) if it is currently in the middle of a transaction or has pending requests (among other reasons). Now, ast_channel_request_stream_topology_change always indicates a stream topology request change even if the requested topology equals the channel's topology. For res_pjsip_session.c: The function resolve_refresh_media_states does not process stream state changes if the delayed active state differs from the current active state. I.e. if the currently active stream state has changed between the time the sip session refresh request was queued and the time it is being processed, the session refresh is ignored. However, res_pjsip_session contains logic that ensures that session refreshes are queued and re-queued correctly if a session refresh is currently not possible. So this check is not necessary and led to some session refreshes being lost. Now, a session refresh is done even if the delayed active state differs from the current active state and it is checked whether the delayed pending state differs from the current active - because that means a refresh is necessary. Further, the unit test of resolve_refresh_media_states was adapted to reflect the new behavior. I.e. the changes to delayed pending are prioritized over the changes to current active because we want to preserve the original intention of the pending state. ASTERISK-30184 Change-Id: Icd0703295271089057717006730b555b9a1d4e5a	2 years ago
Joshua C. Colp	61922d2934	res_agi: Respect "transmit_silence" option for "RECORD FILE". ... The "RECORD FILE" command in res_agi has its own implementation for actually doing the recording. This has resulted in it not actually obeying the option "transmit_silence" when recording. This change causes it to now send silence if the option is enabled. ASTERISK-30314 Change-Id: Ib3a85601ff35d1b904f836691bad8a4b7e957174	2 years ago
Mike Bradeen	50e2921a48	res_pjsip: prevent crash on websocket disconnect ... When a websocket (or potentially any stateful connection) is quickly created then destroyed, it is possible that the qualify thread will destroy the transaction before the initialzing thread is finished with it. Depending on the timing, this can cause an assertion within pjsip. To prevent this, ast_send_stateful_response will now create the group lock and add a reference to it before creating the transaction. While this should resolve the crash, there is still the potential that the contact will not be cleaned up properly, see:ASTERISK~29286. As a result, the contact has to 'time out' before it will be removed. ASTERISK-28689 Change-Id: Id050fded2247a04d8f0fc5b8a2cf3e5482cb8cee	3 years ago
Igor Goncharovsky	096529d33f	res_pjsip_outbound_registration: Allow to use multiple proxies for registration ... Current registration code use pjsip_parse_uri to verify outbound_proxy that is different from the reading this option for the endpoint. This made value with multiple proxies invalid for registration pjsip settings. Removing URI validation helps to use registration through multiple proxies. ASTERISK-30217 #close Change-Id: I064558e66f04b9f3260c46181812a01349761357	3 years ago
Naveen Albert	ca8900b0f6	tests: Fix compilation errors on 32-bit. ... Fix compilation errors caused by using size_t instead of uintmax_t and non-portable format specifiers. ASTERISK-30273 #close Change-Id: I363e6057ef84d54b88af80d23ad6147eef9216ee	3 years ago
Henning Westerholt	12445040d3	res_pjsip: return all codecs on a re-INVITE without SDP ... Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Naveen Albert	40b52322e5	res_pjsip_notify: Add option support for AMI. ... The PJSIP notify CLI commands allow for using "options" configured in pjsip_notify.conf. This allows these same options to be used in AMI actions as well. Additionally, as part of this improvement, some repetitive common code is refactored. ASTERISK-30263 #close Change-Id: Ie4496b322b63b61eaf9672183a959ab99a04b6b5	3 years ago
Naveen Albert	c32b39d123	res_pjsip_logger: Add method-based logging option. ... Expands the pjsip logger to support the ability to filter by SIP message method. This can make certain types of SIP debugging easier by only logging messages of particular method(s). ASTERISK-30146 #close Co-authored-by: Sean Bright <sean@seanbright.com> Change-Id: I9c8cbb6fc8686ef21190eb42e08bc9a9b147707f	3 years ago
Naveen Albert	9258d8212a	res_pjsip_pubsub: Prevent removing subscriptions. ... pjproject does not provide any mechanism of removing event packages, which means that once a subscription handler is registered, it is effectively permanent. pjproject will assert if the same event package is ever registered again, so currently unloading and loading any Asterisk modules that use subscriptions will cause a crash that is beyond our control. For that reason, we now prevent users from being able to unload these modules, to prevent them from ever being loaded twice. ASTERISK-30264 #close Change-Id: I7fdcb1a5e44d38b7ba10c44259fe98f0ae9bc12c	3 years ago
Philip Prindeville	d0bea5a725	res_crypto: handle unsafe private key files ... ASTERISK-30213 #close Change-Id: I4a77143d41615b7c4fc25bb1251c0a9cb87b417a	3 years ago
Mike Bradeen	907d7e7d7d	audiohook: add directional awareness ... Add enum to allow setting optional direction. If set to only one direction, only feed matching-direction frames to the associated slin factory. This prevents mangling the transcoder on non-mixed frames when the READ and WRITE frames would have otherwise required it. Also removes the need to mute or discard the un-wanted frames as they are no longer added in the first place. res_stasis_snoop is changed to use this addition to set direction on audiohook based on spy direction. If no direction is set, the ast_audiohook_init will init this enum to BOTH which maintains existing functionality. ASTERISK-30252 Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb	3 years ago
Naveen Albert	e0e7f35730	res_tonedetect: Add ringback support to TONE_DETECT. ... Adds support for detecting audible ringback tone to the TONE_DETECT function using the p option. ASTERISK-30254 #close Change-Id: Ie2329ff245248768367d26749c285fbe823f6414	3 years ago
Philip Prindeville	ef74ecacc7	res_crypto: don't modify fname in try_load_key() ... "fname" is passed in as a const char *, but strstr() mangles that into a char *, and we were attempting to modify the string in place. This is an unwanted (and undocumented) side-effect. ASTERISK-30213 Change-Id: Ifa36d352aafeb7f9beec3f746332865c7d21e629	3 years ago
Philip Prindeville	5e2485b5c0	res_crypto: use ast_file_read_dirs() to iterate ... ASTERISK-30213 Change-Id: I115f5f8942ffcfb23cd2559a55bac8a2eba081e0	3 years ago
George Joseph	2a500b325a	res_geolocation: Update wiki documentation ... Also added a note to the geolocation.conf.sample file and added a README to the res/res_geolocation/wiki directory. Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc	3 years ago
Maximilian Fridrich	0d2e140123	res_pjsip: Add mediasec capabilities. ... This patch adds support for mediasec SIP headers and SDP attributes. These are defined in RFC 3329, 3GPP TS 24.229 and draft-dawes-sipcore-mediasec-parameter. The new features are implemented so that a backbone for RFC 3329 is present to streamline future work on RFC 3329. With this patch, Asterisk can communicate with Deutsche Telekom trunks which require these fields. ASTERISK-30032 Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2	3 years ago
Holger Hans Peter Freyther	62881c668b	res_prometheus: Do not crash on invisible bridges ... Avoid crashing by skipping invisible bridges and checking the snapshot for a null pointer. In effect this is how the bridges are enumerated in res/ari/resource_bridges.c already. ASTERISK-30239 ASTERISK-30237 Change-Id: I58ef9f44036feded5966b5fc70ae754f8182883d	3 years ago
Naveen Albert	8afb313a43	res_pjsip_geolocation: Change some notices to debugs. ... If geolocation is not in use for an endpoint, the NOTICE log level is currently spammed with messages about this, even though nothing is wrong and these messages provide no real value. These log messages are therefore changed to debugs. ASTERISK-30241 #close Change-Id: I656b355d812f67cc0f0fdf09b00b0e1458598bb4	3 years ago
Maximilian Fridrich	5bbad0d27c	res_pjsip: Add 100rel option "peer_supported". ... This patch adds a new option to the 100rel parameter for pjsip endpoints called "peer_supported". When an endpoint with this option receives an incoming request and the request indicated support for the 100rel extension, then Asterisk will send 1xx responses reliably. If the request did not indicate 100rel support, Asterisk sends 1xx responses normally. ASTERISK-30158 Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad	3 years ago