Otherwise, the value 'false' was not found in the enumerated set of
the XML DTD for the XML attribute 'required' in the XML element
'parameter'. Therefore, DTD validation of the runtime XML failed.
ASTERISK-29790
Change-Id: Id13f230ad65a70dd8c2e3ae9ac85d1e841aed03e
In developer mode, use internal documentation as well.
This should produce no warnings. Fix yours!
In noisy mode, output all possible warnings of Doxygen.
This creates zillion of warnings. Double-check your current module!
Any warnings are in the file './doxygen.log'. Beside that, this change
avoids deprecated parameters because the configuration file for Doxygen
contains only those parameters which differ from the default. This
avoids the need to update the file on each run. Furthermore, it adds
AST_VECTOR to be expanded. Finally, the default name for that file is
Doxyfile. Therefore, let us use that!
ASTERISK-26991
ASTERISK-20259
Change-Id: I4129092a199d5e24c319a09cd088614b121015af
Newer versions of spandsp did refactoring of code to add new features
like color FAXing. This refactoring broke backwards compatibility.
Add support for the new version while retaining support for 0.0.6.
ASTERISK-29729 #close
Change-Id: I3bd74550604ebcf0304528d647fa39abc62fbaa1
Makes basic call progress tone detection available
in a tech-agnostic manner with the addition of the
ToneScan application. This can determine if the channel
has encountered a busy signal, SIT tones, dial tone,
modem, fax machine, etc. A few basic async progress
tone detect options are also added to the TONE_DETECT
function.
ASTERISK-29720 #close
Change-Id: Ia02437e0450473031e294798b8cb421fb8f24e90
Historically, the dial syntax for IAX2 has held that
an outkey (used only for RSA authenticated calls)
and a secret (used only for plain text and MD5 authenticated
calls, historically) were mutually exclusive, and thus
the same position in the dial string was used for both
values.
Now that encryption is possible with RSA authentication,
this poses a limitation, since encryption requires a
secret and RSA authentication requires an outkey. Thus,
the dial syntax is extended so that both a secret and
an outkey can be specified.
The new extended syntax is backwards compatible with the
old syntax. However, a secret can now be specified after
the outkey, or the outkey can be specified after the secret.
This makes it possible to spawn an encrypted RSA authenticated
call without a corresponding peer being predefined in iax.conf.
ASTERISK-29707 #close
Change-Id: I1f8149313ed760169d604afbb07720a8b07dd00e
The search for a running asterisk when --running is used
has been greatly simplified and in the event it doesn't
work, you can now specify a pid to use on the command
line with --pid.
The search for asterisk modules when --tarball-coredumps
is used has been enhanced to have a better chance of finding
them and in the event it doesn't work, you can now specify
--libdir on the command line to indicate the library directory
where they were installed.
The DATEFORMAT variable was renamed to DATEOPTS and is now
passed to the 'date' utility rather than running DATEFORMAT
as a command.
The coredump and output files are now renamed with DATEOPTS.
This can be disabled by specifying --no-rename.
Several confusing and conflicting options were removed:
--append-coredumps
--conffile
--no-default-search
--tarball-uniqueid
The script was re-structured to make it easier for follow.
Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59
The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.
Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.
Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7
Add a time_t logintime to storage a time when a member is added into a
queue.
Also, includes show this time (in seconds) using a 'queue show' command
and the field LoginTime for response for AMI events.
ASTERISK-18069 #close
Change-Id: Ied6c3a300f78d78eebedeb3e16a1520fc3fff190
I am adding a mix option that will play by filename and say.conf unlike
say option that will only play with say.conf. It
will look on the format of the name, if it is like say it play with
say.conf if not it will play the file name.
ASTERISK-29662
Change-Id: I815816916a308f0fa8f165140dc15772dcbd547a
Adds support for encryption to RSA-authenticated
calls. Also prevents crashes if an RSA IAX2 call
is initiated to a switch requiring encryption
but no secret is provided.
ASTERISK-20219
Change-Id: I18f1f9d7c59b4f9cffa00f3b94a4c875846efd40
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
The MessageSend AMI action has been updated to allow the Destination
and the To addresses to be provided separately. This brings the
MessageSend manager command in line with the capabilities of the
MessageSend dialplan application.
ASTERISK-29663 #close
Change-Id: I8513168d3e189a9fed88aaab6f5547ccb50d332c
Adds a function to check for the existence of a channel by
name or by UNIQUEID.
ASTERISK-29656 #close
Change-Id: Ib464e9eb6e13dc683a846286798fecff4fd943cb
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Adds a SendMF application and PlayMF manager
event to send arbitrary R1 MF tones on the
current or specified channel.
ASTERISK-29496
Change-Id: I5d89afdbccee3f86cc702ed96d882f3d351327a4
Adds the STRBETWEEN function, which can be used to insert a
substring between each character in a string. For instance,
this can be used to insert pauses between DTMF tones in a
string of digits.
ASTERISK-29627
Change-Id: Ice23009d4a8e9bb9718d2b2301d405567087d258
Adds the DIRNAME and BASENAME functions, which are
wrappers around the corresponding C library functions.
These can be used to safely and conveniently work with
file paths and names in the dialplan.
ASTERISK-29628 #close
Change-Id: Id3aeb907f65c0ff96b6e57751ff0cb49d61db7f3
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
There is an option to silence voicemail instructions but it does not
take into consideration if a recorded greeting exists or not. Add a
new 'S' option that does that.
ASTERISK-29632 #close
Change-Id: I03f2f043a9beb9d99deab302247e2a8686066fb4
Adds an information element for ANI2 so that
Originating Line Information can be transmitted
over IAX2 channels.
ASTERISK-29605 #close
Change-Id: Iaeacdf6ccde18eaff7f776a0f49fee87dcb549d2
Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.
ASTERISK-18454 #close
Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b
This allows the STUN server to change its IP address without having to
reload the res_rtp_asterisk module.
The refresh of the name resolution occurs first when the module is
loaded, then recurringly, slightly after the previous DNS answer TTL
expires.
ASTERISK-29508 #close
Change-Id: I7955a046293f913ba121bbd82153b04439e3465f
Prevents reloads of app_queue from also resetting
queue statistics.
Also preserves individual queue agent statistics
if we're just reloading members.
ASTERISK-28701
Change-Id: Ib5d4cdec175e44de38ef0f6ede4a7701751766f1
Allow mapping pjproject log messages to the Asterisk TRACE
log level. The defaults were also changes to log pjproject
levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6
all went to DEBUG.
ASTERISK-29582
Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d
The Milliwatt application uses incorrect tone timings
that cause it to play the 1004 Hz tone constantly.
This adds an option to enable the correct timing
behavior, so that the Milliwatt application can
be used for milliwatt test lines. The default behavior
remains unchanged for compatability reasons, even
though it is incorrect.
ASTERISK-29575 #close
Change-Id: I73ccc6c6fcaa31931c6fff3b85ad1805b2ce9d8c
Previously, the Morsecode application only supported international
Morse code. This adds support for American Morse code and adds an
option to configure the frequency used in off intervals.
Additionally, the application checks for hangup between tones
to prevent application execution from continuing after hangup.
ASTERISK-29541
Change-Id: I172431a2e18e6527d577e74adfb05b154cba7bd4
Adds a function to scramble audio on a channel using
whole spectrum frequency inversion. This can be used
as a privacy enhancement with applications like
ChanSpy or other potentially sensitive audio.
ASTERISK-29542
Change-Id: I01020769d91060a1f56a708eb405f87648d1a67e
A list of codecs to use for dialplan-originated calls can
now be specified in Originate, similar to the ability
in call files and the manager action.
Additionally, we now default to just using the slin codec
for originated calls, rather than all the slin* codecs up
through slin192, which has been known to cause issues
and inconsistencies from AMI and call file behavior.
ASTERISK-29543
Change-Id: I96a1aeb83d54b635b7a51e1b4680f03791622883
app_meetme is deprecated in 19, to be removed in 21.
app_osplookup is deprecated in 19, to be removed in 21.
chan_alsa is deprecated in 19, to be removed in 21.
chan_mgcp is deprecated in 19, to be removed in 21.
chan_skinny is deprecated in 19, to be removed in 21.
res_pktccops is deprecated in 19, to be removed in 21.
app_macro was deprecated in 16, to be removed in 21.
chan_sip was deprecated in 17, to be removed in 21.
res_monitor was deprecated in 16, to be removed in 21.
ASTERISK-29548
ASTERISK-29549
ASTERISK-29550
ASTERISK-29551
ASTERISK-29552
ASTERISK-29553
ASTERISK-29558
ASTERISK-29567
ASTERISK-29572
Change-Id: Ic3bee31a10d42c4b3bbc913d893f7b2a28a27131
Adds function to selectively drop specified frames
in the TX or RX direction on a channel, including
control frames.
ASTERISK-29478
Change-Id: I8147c9d55d74e2e48861edba6b22f930920541ec
Allows multiple files comprising an agent announcement
to be played by separating on the ampersand, similar
to the multi-file support in other Asterisk applications.
ASTERISK-29528
Change-Id: Iec600d8cd5ba14aa1e4e37f906accb356cd7891a
PJSIP currently does not provide a function to replace SIP_HEADERS() function to get a list of headers from INVITE request.
It may be used to get all X- headers in case the actual set and names of headers unknown.
ASTERISK-29389
Change-Id: Ic09d395de71a0021e0d6c5c29e1e19d689079f8b
Meter types are not well supported,
lacking support in telegraf, datadog and the official statsd servers.
We deprecate meters and provide a compliant fallback for any existing usages.
A flag has been introduced to allow meters to fallback to counters.
ASTERISK-29513
Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7
Adds application to asynchronously collect digits
dialed on a channel in the TX or RX direction
using a framehook and stores them in a specified
variable, up to a configurable number of digits.
ASTERISK-29477
Change-Id: I51aa93fc9507f7636ac44806c4420ce690423e6f
Asterisk first looks at the end of the URL to determine the file
extension of the returned audio, which in many cases will not work
because the URL may end with a query string or a URL fragment. If that
fails, Asterisk then looks at the Content-Type header and then finally
parses the URL to get the extension.
The order has been changed such that we look at the Content-Type
header first, followed by looking for the extension of the parsed
URL. We no longer look at the end of the URL, which was error prone.
ASTERISK-29527 #close
Change-Id: I1e3f83b339ef2b80661704717c23568536511032
While several applications exist to wait for
a certain event to occur, none allow waiting
for any generic expression to become true.
This application allows for waiting for a condition
to become true, with configurable timeout and
checking interval.
ASTERISK-29444
Change-Id: I08adf2824b8bc63405778cf355963b5005612f41
When we try to play a list of sound files in the same Play command,
we get only one PlaybackFinish event, after all sounds are played.
But in the case where the Play fails (because channel is destroyed
for example), Asterisk will send one PlaybackFinish event for each
sound file still to be played. If the list is big, Asterisk is
sending many events.
This patch adds a failed state so we can understand that the play
failed. On that case we don't send the event, if we still have a
list of sounds to be played.
When we reach the last sound, we send the PlaybackFinish with
the failed state.
ASTERISK-29464 #close
Change-Id: I4c2e5921cc597702513af0d7c6c2c982e1798322
Hitherto, the A option has made it possible to play
audio upon answer to the called party only. This option
is expanded to allow for playback of an audio file to
the caller instead of or in addition to the audio
played to the answerer.
ASTERISK-29442
Change-Id: If6eed3ff5c341dc8c588c8210987f2571e891e5e
Caller ID can now be set on the called channel and
Variables can now be set on the destination
using the Originate application, just as
they can be currently using call files
or the Manager Action.
ASTERISK-29450
Change-Id: Ia64cfe97d2792bcbf4775b3126cad662922a8b66
Adds a new ConfKick() application, which may
be used to kick a specific channel, all channels,
or all non-admin channels from a specified
conference bridge, similar to existing CLI and
AMI commands.
ASTERISK-29446
Change-Id: I5d96b683880bfdd27b2ab1c3f2e897c5046ded9b
A new user option, answer_channel, adds the capability to
prevent answering the channel if it hasn't already been
answered yet.
ASTERISK-29440
Change-Id: I26642729d0345f178c7b8045506605c8402de54b
* Implemented the new "to" parameter of the MessageSend()
dialplan application. This allows a user to specify
a complete SIP "To" header separate from the Request URI.
* Completely refactored the get_outbound_endpoint() function
to actually handle all the destination combinations that
we advertized as supporting.
* We now also accept a destination in the same format
as Dial()... PJSIP/number@endpoint
* Added lots of debugging.
ASTERISK-29404
Reported by Brian J. Murrell
Change-Id: I67a485196d9199916468f7f98bfb9a0b993a4cce
Introduces three new dialplan functions, MIN and MAX,
which can be used to calculate the minimum or
maximum of up to two numbers, and ABS, an absolute
value function.
ASTERISK-29431
Change-Id: I2bda9269d18f9d54833c85e48e41fce0e0ce4d8d
Up until now, the VOLUME function has been write
only, so that TX/RX values can be set but not
read afterwards. Now, previously set TX/RX values
can be read later.
ASTERISK-29439
Change-Id: Ia23e92fa2e755c36e9c8e69f2940d2703ccccb5f
In multidomain environments, it is desirable to create
PJSIP endpoints with the domain info in the endpoint name
in pjsip_endpoint.conf. This resulted in an error with
registrations, NOTIFY, and OPTIONS packet generation.
This commit will detect if there is an @ in the endpoint
identifier and generate the URI accordingly so NOTIFY and
OPTIONS From headers will generate correctly.
ASTERISK-28393
Change-Id: I96f8d01dfdd5573ba7a28299e46271dd4210b619
By default Asterisk reports the PJSIP version in a SOFTWARE attribute
of every STUN packet it sends. This may not be desired in a production
environment, and RFC5389 recommends making the use of the SOFTWARE
attribute a configurable option:
https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2
This patch adds a `stun_software_attribute` yes/no option to make it
possible to omit the SOFTWARE attribute from STUN packets.
ASTERISK-29434
Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b
RFC 4235 Section 4.1.6 describes XML elements that should be
sent to subscribed endpoints to identify the local and remote
participants in the dialog.
This patch adds this functionality to PJSIP by iterating through the
ringing channels causing the NOTIFY, and inserts the channel info
into the dialog so that information is properly passed to the endpoint
in dialog-info+xml.
ASTERISK-24601
Patch submitted: Joshua Elson
Modified by: Joseph Nadiv and Sean Bright
Tested by: Joseph Nadiv
Change-Id: I20c5cf5b45f34d7179df6573c5abf863eb72964b
Although Asterisk can receive and propogate flash events, it currently
provides no mechanism for doing anything with them itself.
This AMI event allows flash events to be processed by Asterisk.
Additionally, AST_CONTROL_FLASH is included in a switch statement
in channel.c to avoid throwing a warning when we shouldn't.
ASTERISK-29380
Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81
Hitherto, VoiceMail() played a non-customizable beep tone to indicate
the caller could leave a message. In some cases, the beep may not
be desired, or a different tone may be desired.
To increase flexibility, a new option allows customization of the tone.
If the t option is specified, the default beep will be overridden.
Supplying an argument will cause it to use the specified file for the tone,
and omitting it will cause it to skip the beep altogether. If the option
is not used, the default behavior persists.
ASTERISK-29349
Change-Id: I1c439c0011497e28a28067fc1cf1e654c8843280
STIR/SHAKEN encodes using base64 URL format. Currently, we just use
base64. New functions have been added that convert to and from base64
encoding.
The origid field should also be an UUID. This means there's no reason to
have it as an option in stir_shaken.conf, as we can simply generate one
when creating the Identity header.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c
During OpenSIPit, we found out that the public certificates must be of
type X.509. When reading in public keys, we use the corresponding X.509
functions now.
We also discovered that we needed a better naming scheme for the
certificates since certificates with the same name would cause issues
(overwriting certs, etc.). Now when we download a public certificate, we
get the serial number from it and use that as the name of the cached
certificate.
The configuration option public_key_url in stir_shaken.conf has also
been renamed to public_cert_url, which better describes what the option
is for.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d
Enhancements:
* The MessageSend dialplan application now takes an optional
third argument that can set the message's "To" field on
outgoing messages. It's an alternative to using the
MESSAGE(to) dialplan function.
NOTE: No channel driver currently implements this field. A
follow-on commit for res_pjsip_messaging will implement it for
the chan_pjsip channel driver.
* To prevent confusion with the first argument, currently named
"to", it's been renamed to "destination". Its function,
creating the request URI, hasn't changed.
* The documentation for MessageSend was updated to be
more clear about the parameters and how they interact
the MESSAGE() dialplan function.
* With the rename of MessageSend's first parameter, and the fact
that message.c references <info> elements in chan_sip.c,
res_pjsip_messaging.c and res_xmpp, they each needed
documentation updates to use MessageDestinationInfo instead of
MessageToInfo.
* appdocsxml.dtd was updated to include a missing element
declaration for "dataType". This was showing up as an error
in Eclipse's dtd editor.
* Despite the changes in this commit, there should be
no impact to current users of MessageSend.
Change-Id: I6fb5b569657a02866a66ea352fd53d30d8ac965a
Added .log extension to the sample logs in logger.conf.sample so that
they will be able to be opened in the browser when attached to JIRA
tickets. Because of this, asterisk.logrotate has also been updated to
look for .log extensions instead of no extension for log files such as
full and messages.
Change-Id: I5de743c03f08047d6c6cc80cac5019ae0c4c200f
The 'core' console (ie: asterisk -c) does read logger.conf and does
use the dateformat= option.
Whereas 'remote' consoles (ie: asterisk -r -T) does not read logger.conf
and uses a hard coded dateformat option for printing received verbose messages:
main/logger.c: static char dateformat[256] = "%b %e %T"
This change will load logger.conf for each remote console session and
use the dateformat= option to set the per-line timestamp for verbose messages
Change-Id: I3ea10990dbd920e9f7ce8ff771bc65aa7f4ea8c1
ASTERISK-25358: #close
Reported-by: Igor Liferenko
Some configuration items for a transport do not result in
the underlying transport changing, but instead are just
state we keep ourselves and use. It is perfectly reasonable
to change these items.
These include local_net and external_* information.
ASTERISK-29354
Change-Id: I027857ccfe4419f460243e562b5f098434b3d43a
This change embeds the MODULEINFO block of modules
into the core XML documentation. This provides a shared
mechanism for use by both menuselect and Asterisk for
information and a definitive source of truth.
ASTERISK-29335
Change-Id: Ifbfd5c700049cf320a3e45351ac65dd89bc99d90
minargs enables enforcing of minimum count of arguments to pass to
func_odbc, so if you're unconditionally using ARG1 through ARG4 then
this should be set to 4. func_odbc will generate an error in this case,
so for example
[FOO]
minargs = 4
and ODBC_FOO(a,b,c) in dialplan will now error out instead of using a
potentially leaked ARG4 from Gosub().
ARGC is needed if you're using optional argument, to verify whether or
not an argument has been passed, else it's possible to use a leaked ARGn
from Gosub (app_stack). So now you can safely do
${IF($[${ARGC}>3]?${ARGV}:default value)} kind of thing.
Change-Id: I6ca0b137d90b03f6aa9c496991f6cbf1518f6c24
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
If there's no secret specified for an iax2 peer and there's no secret
specified in the dial string, Asterisk will crash if the auth method
requested by the peer is MD5 or plaintext. You also couldn't specify
a default auth method in the [general] section of iax.conf so if you
don't have static peers defined and just use the dial string, Asterisk
will still crash even if you have a secret specified in the dial string.
* Added logic to iax2_call() and authenticate_reply() to print
a warning and hanhup the call if encryption is requested and
there's no secret or auth method. This prevents the crash.
* Added the ability to specify a default "auth" in the [general]
section of iax.conf.
ASTERISK-29624
Reported by: N A
Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254
When a Transfer/REFER is executed, TRANSFERSTATUSPROTOCOL variable is
0 when no protocl specific error
SIP example of failure, 3xx-6xx for the SIP error code received
This allows applications to perform actions based on the failure
reason.
ASTERISK-29252 #close
Reported-by: Dan Cropp
Change-Id: Ia6a94784b4925628af122409cdd733c9f29abfc4
As described in the issue, /tmp is not a suitable location for a
large amount of cached media files, since most distributions make
/tmp a RAM-based tmpfs mount with limited capacity.
I opted for a location that can be configured separately, as opposed
to using a subdirectory of spooldir, given the different storage
profile (transient files vs files that might stay there indefinitely).
This commit just makes the cache directory configurable, and changes
the default location from /tmp to /var/cache/asterisk.
ASTERISK-29143
Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d
When using this option, answering the channel is deferred until
all prompts/greetings have been played and the caller is about
to leave their message.
ASTERISK-29118 #close
Change-Id: I41b9f0428783c0bd697c8c994f906d1e75ce9ddb
Added debug logging categories that allow a user to output debug
information based on a specified category. This lets the user limit,
and filter debug output to data relevant to a particular context,
or topic. For instance the following categories are now available for
debug logging purposes:
dtls, dtls_packet, ice, rtcp, rtcp_packet, rtp, rtp_packet,
stun, stun_packet
These debug categories can be enable/disable via an Asterisk CLI command.
While this overrides, and outputs debug data, core system debugging is
not affected by this patch. Statements still output at their appropriate
debug level. As well backwards compatibility has been maintained with
past debug groups that could be enabled using the CLI (e.g. rtpdebug,
stundebug, etc.).
ASTERISK-29054 #close
Change-Id: I6e6cb247bb1f01dbf34750b2cd98e5b5b41a1849
app_confbridge now has the ability to set the estimated bitrate on an
SFU bridge. To use it, set a bridge profile's remb_behavior to "force"
and set remb_estimated_bitrate to a rate in bits per second. The
remb_estimated_bitrate parameter is ignored if remb_behavior is something
other than "force".
Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a
This patch makes it so if the PJSIP_SEND_SESSION_REFRESH dialplan function
is called on a channel prior to answering a warning is issued and the
function returns unsuccessful.
ASTERISK-28878 #close
Change-Id: I053f767d10cf3b2b898fa9e3e7c35ff07e23c9bb
Added a new log formatter called "plain" that always prints
file, function and line number if available (even for verbose
messages) and never prints color control characters. It also
doesn't apply any special formatting for verbose messages.
Most suitable for file output but can be used for other channels
as well.
You use it in logger.conf like so:
debug => [plain]debug
console => [plain]error,warning,debug,notice,pjsip_history
messages => [plain]warning,error,verbose
Change-Id: I4fdfe4089f66ce2f9cb29f3005522090dbb5243d
Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.
Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.
Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.
Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1
If your queues.conf had _no_ [general] section, they would default to
'yes'. Now, they always default to 'no'.
(Actually, commit ed615afb7e already
partially fixed it for shared_lastcall.)
ASTERISK-28951
Change-Id: Ic39d8a0202906bc454194368bbfbae62990fe5f6
Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.
This causes unexpected rport handle at the other end.
Added option for disable this behaviour in the pjsip.conf.
This is a system option, but working as a gloabl option.
ASTERISK-28959
Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc
This patch allows a user of AMI to now specify the type of message
content contained within by setting the 'Content-Type' parameter.
Note, the AMI version has been bumped for this change.
ASTERISK-28945 #close
Change-Id: Ibb5315702532c6b954e1498beddc8855fabdf4bb
The Streams API becomes the home for the core ACN capabilities.
These include...
* Parsing and formatting of codec negotation preferences.
* Resolving pending streams and topologies with those configured
using configured preferences.
* Utility functions for creating string representations of
streams, topologies, and negotiation preferences.
For codec negotiation preferences:
* Added ast_stream_codec_prefs_parse() which takes a string
representation of codec negotiation preferences, which
may come from a pjsip endpoint for example, and populates
a ast_stream_codec_negotiation_prefs structure.
* Added ast_stream_codec_prefs_to_str() which does the reverse.
* Added many functions to parse individual parameter name
and value strings to their respectrive enum values, and the
reverse.
For streams:
* Added ast_stream_create_resolved() which takes a "live" stream
and resolves it with a configured stream and the negotiation
preferences to create a new stream.
* Added ast_stream_to_str() which create a string representation
of a stream suitable for debug or display purposes.
For topology:
* Added ast_stream_topology_create_resolved() which takes a "live"
topology and resolves it, stream by stream, with a configured
topology stream and the negotiation preferences to create a new
topology.
* Added ast_stream_topology_to_str() which create a string
representation of a topology suitable for debug or display
purposes.
* Renamed ast_format_caps_from_topology() to
ast_stream_topology_get_formats() to be more consistent with
the existing ast_stream_get_formats().
Additional changes:
* A new function ast_format_cap_append_names() appends the results
to the ast_str buffer instead of replacing buffer contents.
Change-Id: I2df77dedd0c72c52deb6e329effe057a8e06cd56
The AMI action and CLI command did not take into account the properties
of full backend caching. This resulted in an expired object remaining
removed until a full backend update occurred, instead of having the
object updated when needed.
This change makes it so that the AMI action and CLI command for object
expire will now fail instead of putting the cache into an undesired
state. If full backend caching is enabled then only operations
which act on the entire cache are available.
ASTERISK-28942
Change-Id: Id662d888f177ab566c8e802ad583083b742d21f4
The PJSIP packet logger now has the following CLI commands:
pjsip set logger pcap <filename>
When used this will create a pcap file containing the incoming
and outgoing SIP packets, in unencrypted form.
pjsip set logger verbose <on / off>
This allows you to toggle logging to verbose on and off.
pjsip set logger host <IP/subnet mask> add
This allows you to add an additional IP address or subnet
mask to logging, allowing you to log multiple instead of
just a single IP address or all traffic.
The normal "pjsip set logger host" CLI command has also been
expanded to allow subnet masks as well.
ASTERISK-28895
Change-Id: If5859161a72b0d7dd2d1f92d45bed88e0cd07d0e
This change adds the same variable functionality that
is available for originating a channel to the create
call. Now when creating a channel you can specify
dialplan variables to set instead of having to do another
API call.
ASTERISK-28896
Change-Id: If13997ba818136d7c070585504fc4164378aa992
There are a lot of moving parts in this patch, but the focus of it is on
the verification of the signature using a public key located at the
public key URL provided in the JSON payload. First, we check the
database to see if we have already downloaded the key. If so, check to
see if it has expired. If it has, redownload from the URL. If we don't
have an entry in the database, just go ahead and download the public
key. The expiration is tested each time we download the file. After
that, read the public key from the file and use it to verify the
signature. All sanity checking is done when the payload is first
received, so the verification is complete once this point is reached.
The XML has also been added since a new config option was added to
general (curl_timeout). The maximum amount of time to wait for a
download can be configured through this option, with a low value by
default.
Change-Id: I3ba4c63880493bf8c7d17a9cfca1af0e934d1a1c
Some places in Asterisk did not treat the formats on a stream
as immutable when they are.
The ast_stream_get_formats function is now const to enforce this
and parts of Asterisk have been updated to take this into account.
Some violations of this were also fixed along the way.
An additional minor tweak is that streams are now allocated with
an empty format capabilities structure removing the need in various
places to check that one is present on the stream.
ASTERISK-28846
Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe
When in a conference bridge it may be necessary to have
text messages disabled for specific participants or for
all. This change adds a configuration option, "text_messaging",
which can be used to enable or disable this on the
user profile. By default existing behavior is preserved
as it defaults to "yes".
ASTERISK-28841
Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.
This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.
ASTERISK-28787
Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This change introduce a CLI command for the RTP to display the general
configuration.
In the first step add the follow fields of the configurations:
- rtpstart
- rtpend
- dtmftimeout
- rtpchecksum
- strictrtp
- learning_min_sequential
- icesupport
Change-Id: Ibe5450898e2c3e1ed68c10993aa1ac6bf09b821f
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
ASTERISK-28755 #close
Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f
The optional synchronization behavior created in
64906c4c9b is now the default for
MixMonitor.
* Add a new flag 'n' that allows for this behavior to be turned off
* Add a notice when the 'S' option is used indicating that it is no
longer necessary
Change-Id: I158987c475cda4e1ff1256dd0daccdd99df568b4
When opening a file for writing, Asterisk silently converts filenames
ending with 'wav49' to 'WAV.' We aren't taking that in to account when
setting the MIXMONITOR_FILENAME variable in MixMonitor.
* If the user wants to write to a wav49 file, make sure that it is
reflected properly in MIXMONITOR_FILENAME.
* Add a note to the documentation describing this behavior.
* Add a note in main/file.c indicating that app_mixmonitor needs to be
changed if the logic in build_filename was changed.
ASTERISK-24798 #close
Reported by: xrobau
Change-Id: I384691ce624eb55c80a125b9ca206d2d691c574c
Although the wiki page for the new CHANGES and UPGRADE scheme
states that the files must have the ".txt" suffix, the READMEs
didn't.
Change-Id: I490306aa2cc24d6f014738e9ebbc78592efe0f05
(cherry picked from commit 7416703f04)
In order to reduce the amount of AMI and ARI events generated,
the global "Message/ast_msg_queue" channel can be set to suppress
it's normal channel housekeeping events such as "Newexten",
"VarSet", etc. This can greatly reduce load on the manager
and ARI applications when the Digium Phone Module for Asterisk
is in use. To enable, set "hide_messaging_ami_events" in
asterisk.conf to "yes" In Asterisk versions <18, the default
is "no" preserving existing behavior. Beginning with
Asterisk 18, the option will default to "yes".
NOTE: This change does not affect UserEvents or the ARI
TextMessageReceived events.
* Added the "hide_messaging_ami_events" option to asterisk.conf.
* Changed message.c to set the AST_CHAN_TP_INTERNAL property on
the "Message/ast_msg_queue" channel if the option is set in
asterisk.conf. This suppresses the reporting of the events.
Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b
Add a new configuration option 'enable_status' which allows the
/httpstatus URI handler to be administratively disabled.
We also no longer unconditionally register the /static and /httpstatus
URI handlers, but instead do it based upon configuration.
Behavior change: If enable_static was turned off, the URI handler was
still installed but returned a 403 when it was accessed. Because we
now register/unregister the URI handlers as appropriate, if the
/static URI is disabled we will return a 404 instead.
Additionally:
* Change 'enablestatic' to 'enable_static' but keep the former for
backwards compatibility.
* Improve some internal variable names
ASTERISK-28710 #close
Change-Id: I647510f796473793b1d3ce1beb32659813be69e1
* The MailboxExists dialplan application was deprecated on 2006-09-26
in Asterisk 1.6.0 (commit ec83b11183)
* The MAILBOX_EXISTS dialplan function was deprecated on 2011-12-06 in
Asterisk 11.0.0 (commit fd64bb66f9)
Change-Id: I71cfc9d7b9217a37b802f4cc6ef2d57900b7398f
This commit adds support for
[AudioSocket](
https://wiki.asterisk.org/wiki/display/AST/AudioSocket),
a very simple bidirectional audio streaming protocol. There are both
channel and application interfaces.
A description of the protocol can be found on the above referenced
GitHub page. A short talk about the reasons and implementation can be
found on [YouTube](https://www.youtube.com/watch?v=tjduXbZZEgI), from
CommCon 2019.
ARI support has also been added via the existing "externalMedia" ARI
functionality. The UUID is specified using the arbitrary "data" field.
ASTERISK-28484 #close
Change-Id: Ie866e6c4fa13178ec76f2a6971ad3590a3a588b5
We allow for 'maxredirs' to be set, but this value is ignored when
followlocation is not enabled which, by default, it is not.
ASTERISK-17491 #close
Reported by: candrews
Change-Id: I96a4ab0142f2fb7d2e96ff976f6cf7b2982c761a
The QueueMemberPause AMI event includes two fields that return the
reason a member was paused.
* In release branches, deprecate Reason in favor of PausedReason.
* In master, remove the Reason field entirely.
ASTERISK-28349 #close
Reported by: Niksa Baldun
Change-Id: I01da58f2b0ab927baeee754870f62b51b7b3d296
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
Dialplan has to be careful about passing an empty device list or empty
positions in the list. As a result, dialplan has to check for these
conditions before using ChanIsAvail. Simplify dialplan by making
ChanIsAvail handle these conditions gracefully.
* Made tolerate empty positions in the device list.
* Simplified the code and eliminated some unnecessary indention.
ASTERISK-28638
Change-Id: I9e4b67e2cbf26b2417c2d03485b8568e898931d3
* Made BridgeAdd not hangup the call if there is a problem.
* Reduced message level from warning to verbose for normal exception
cases.
* Added a loop safety check to BridgeAdd.
* Made BridgeAdd set BRIDGERESULT with the status when dialplan is
resumed.
Change-Id: I374d39b8a3edcc794eeb5c6b9f31a01424cdc426
Dialplan has to be careful about passing an empty destination list or
empty positions in the list. As a result, dialplan has to check for
these conditions before using Dial. Simplify dialplan by making Dial
handle these conditions gracefully.
* Made tolerate empty positions in the dialed device list.
* Reduced some message log levels from notice to verbose.
ASTERISK-28638
Change-Id: I6edc731aff451f8bdfaee5498078dd18c3a11ab9
Dialplan has to be careful about passing an empty destination list or
empty positions in the list. As a result, dialplan has to check for
these conditions before using Page. Simplify dialplan by making Page
handle these conditions gracefully.
* Made tolerate empty positions in the paged device list.
* Reduced some warnings associated with the 's' option to verbose
messages. The warning level for those messages really serves no purpose
as that is why the 's' option exists.
ASTERISK-28638
Change-Id: I95b64a6d6800cd1a25279c88889314ae60fc21e3
This patch adds a new flag "inhibitConnectedLineUpdates" to the 'addChannel'
operation in the Bridges REST API. When set, this flag avoids generating COLP
frames when the specified channels enter the bridge.
ASTERISK-28629
Change-Id: Ib995d4f0c6106279aa448b34b042b68f0f2ca5dc
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
A previous patch:
Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
made it so a T.38 Gateway tries to negotiate with both sides by sending T.38
negotiation request to both endpoints supported T.38 versus the previous
behavior of forwarding negotiation to the "other" channel once a preamble
was detected.
This had the unfortunate side effect of breaking some setups. Specifically
ones that set the max datagram option on an endpoint configuration (configured
max datagram was not propagated since Asterisk now initiates negotiations).
This patch adds a configuration option, "negotiate_both", that when enabled
makes it so Asterisk initiates the negotiation requests to both endpoints vs.
the previous behavior of waiting, and forwarding the request.
The default is disabled keeping with the old behavior.
ASTERISK-28660
Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a
add missing argument "rtt" and "status" to the documentation
The change to the dtd file allow an enumlist to contain one or many
configOptionToEnum or enum.
This is different from the previous patch I submitted when you could have a
configOptionToEnum or (a configOptionToEnum followed by one or manu enums) or
(one or many enums)
ASTERISK-28626
Change-Id: Ia71743ee7ec813f40297b0ddefeee7909db63b6d
Alexander Traud
Dustin Marquess
Naveen Albert
Josh Soref
George Joseph
Ben Ford
Rodrigo Ramírez Norambuena
Shloime Rosenblum
Matthew Kern
Joseph Nadiv
Sean Bright
Sebastien Duthil
Joshua C. Colp
Igor Goncharovsky
Rijnhard Hessel
Asterisk Development Team
Naveen Albert
Andre Barbosa
Jeremy Lainé
Mark Murawski
Jaco Kroon
Dan Cropp
lvl
Kevin Harwell
Walter Doekes
sungtae kim
Jean Aunis
Friendly Automation
Seán C McCord
Richard Mudgett
Pascal Cadotte Michaud