54 Commits (18.17)

Author	SHA1	Message	Date
Mike Bradeen	24e27a3c6e	res_pjsip: Upgraded bundled pjsip to 2.13 ... Removed multiple patches. Code chages in res_pjsip_pubsub due to changes in evsub. Pjsip now calls on_evsub_state() before on_rx_refresh(), so the sub tree deletion that used to take place in on_evsub_state() now must take place in on_rx_refresh(). Additionally, pjsip now requires that you send the NOTIFY from within on_rx_refresh(), otherwise it will assert when going to send the 200 OK. The idea is that it will look for this NOTIFY and cache it until after sending the response in order to deal with the self-imposed message mis-order. Asterisk previously dealt with this by pushing the NOTIFY in on_rx_refresh(), but pjsip now forces us to use it's method. Changes were required to configure in order to detect which way pjsip handles this as the two are not compatible for the reasons mentioned above. A corresponding change in testsuite is required in order to deal with the small interal timing changes caused by moving the NOTIFY send. ASTERISK-30325 Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f	2 years ago
Joshua C. Colp	f97e9aed85	pjsip: Add TLS transport reload support for certificate and key. ... This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
Sean Bright	db824d8f6d	ast_pkgconfig.m4: AST_PKG_CONFIG_CHECK() relies on sed. ... Make sure that we have a working sed before trying to use it. ASTERISK-30059 #close Change-Id: I9abad67a5df11b665d480feec304ab9d6f55cc76	3 years ago
Naveen Albert	b4c17c2044	menuselect: Don't erroneously recompile modules. ... A bug in menuselect can cause modules that are disabled by default to be recompiled every time a recompilation occurs. This occurs for module categories that are NOT positive output, as for these categories, the modules contained in the makeopts file indicate modules which should NOT be selected. The existing procedure of iterating through these modules to mark modules as present is thus insufficient. This has led to modules with a default_enabled tag of "no" to get deleted and recompiled every time, even when they haven't changed. To fix this, we now modify the mark as present behavior for module categories that are not positive output. For these, we start by iterating through the module tree and marking all modules as present, then go back and mark anything contained in the makeopts file as not present. This ensures that makeopt selections are actually used properly, regardless of whether a module category uses positive output or not. ASTERISK-29728 #close Change-Id: Idf2974c4ed8d0ba3738a92f08a6082b234277b95	3 years ago
Hugh McMaster	b678624f04	configure.ac: Use pkg-config to detect libxml2 ... Use pkg-config to detect libxml2, falling back to xml2-config if the former is not available. This patch ensures Asterisk continues to build on systems without xml2-config installed. The patch also updates the associated 'configure' files. ASTERISK-29970 #close Change-Id: I3c90dfe0b0590486cbb8e6d426a7c5c4199410c0	3 years ago
Alexander Traud	f946b92553	progdocs: Fix for Doxygen, the hidden parts. ... ASTERISK-29779 Change-Id: If338163488498f65fa7248b60e80299c0a928e4b	3 years ago
Josh Soref	7a59a9365a	menuselect: Spelling fixes ... Correct typos of the following word families: dependency unless random dependencies delimited randomly modules ASTERISK-29714 Change-Id: I3920603a8dc7c0a1852d2f885e06b1144692d40e	3 years ago
Mike Bradeen	0b2646aee6	various: Fix GCC 11 compilation issues. ... test_voicemail_api: Use empty char* for empty_msg_ids. chan_skinny: Fix size of calledParty to be maximum extension. menuselect: Change Makefile to stop deprecated warnings. Added comments test_linkedlist: 'bogus' variable was manually allocated from a macro and the test fails if this happens but the compiler couldn't 'see' this and returns a warning. memset to all 0's after allocation. chan_ooh323: Fixed various indentation issues that triggered misleading indentation warnings. ASTERISK-29682 Reported by: George Joseph Change-Id: If4fe42222c8444dc16828a42731ee53b4ce5cbbe	4 years ago
George Joseph	c07e3c2f4d	BuildSystem: Check for alternate openssl packages ... OpenSSL is one of those packages that often have alternatives with later versions. For instance, CentOS/EL 7 has an openssl package at version 1.0.2 but there's an openssl11 package from the epel repository that has 1.1.1. This gets installed to /usr/include/openssl11 and /usr/lib64/openssl11. Unfortunately, the existing --with-ssl and --with-crypto ./configure options expect to point to a source tree and don't work in this situation. Also unfortunately, the checks in ./configure don't use pkg-config. In order to make this work with the existing situation, you'd have to run... ./configure --with-ssl=/usr/lib64/openssl11 \ --with-crypto=/usr/lib64/openssl11 \ CFLAGS=-I/usr/include/openssl11 BUT... those options don't get passed down to bundled pjproject so when you run make, you have to include the CFLAGS again which is a big pain. Oh... To make matters worse, although you can specify PJPROJECT_CONFIGURE_OPTS on the ./configure command line, they don't get saved so if you do a make clean, which will force a re-configure of bundled pjproject, those options don't get used. So... * In configure.ac... Since pkg-config is installed by install_prereq anyway, we now use it to check for the system openssl >= 1.1.0. If that works, great. If not, we check for the openssl11 package. If that works, great. If not, we fall back to just checking for any openssl. If pkg-config isn't installed for some reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified on the ./configure command line, we fall back to the existing logic that uses AST_EXT_LIB_CHECK(). * The whole OpenSSL check process has been moved up before THIRD_PARTY_CONFIGURE(), which does the initial pjproject bundled configure, is run. This way the results of the above checks, which may result in new include or library directories, is included. * Although not strictly needed for openssl, We now save the value of PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used again if a re-configure is triggered. ASTERISK-29693 Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde	4 years ago
Jaco Kroon	f47c5cbdf9	menuselect: exit non-zero in case of failure on --enable|disable options. ... ASTERISK-29348 Change-Id: I77e3466435f5a51a57538b29addb68d811af238d Signed-off-by: Jaco Kroon <jaco@uls.co.za>	4 years ago
Joshua C. Colp	6aac148d59	menuselect: Add ability to set deprecated and removed versions. ... The "deprecated_in" and "removed_in" information can now be set in MODULEINFO for a module and is then displayed in menuselect so users can be aware of when a module is slated to be deprecated and then removed. ASTERISK-29337 Change-Id: I6952889cf08e0e9e99cf8b43f99b3cef4688087a	4 years ago
Joshua C. Colp	9b5042433b	menuselect: Resolve infinite loop in dependency scenario. ... Given a scenario where a module has a dependency on both an external library and a module if the external library was available and the module was not an infinite loop would occur. This happened due to the code changing the dependecy status to no failure on each dependency checking loop iteration, resulting in the code thinking that it had gone from no failure to failure each time triggering another dependency check. This change makes it so that the old dependency status is preserved throughout the dependency checking allowing it to determine that after the first iteration the dependency status does not transition from no failure to failure. ASTERISK-28930 Change-Id: Iea06d45d9fd6d8bfd068882a0bb7e23a53ec3e84	5 years ago
Alexander Traud	966acc6251	pjproject_bundled: Honor --without-pjproject. ... ASTERISK-28837 Change-Id: Id057324912a3cfe6f50af372675626bb515907d9	5 years ago
Alexander Traud	7febd22304	bridge_softmix_binaural: Show state in menuselect. ... ASTERISK-28819 Change-Id: Iba7ee7bc7936d7a156171c8fc0f1670e864e7600	5 years ago
Sebastian Kemper	b7fbb9c41f	check_expr2: fix cross-compile/hardening issues ... When building check_expr2 with ASLR PIE hardening enabled the linker fails. This is resolved by adding the regular compiler flags when building the object files from ast_expr2f.c and ast_expr2.c. Note: The STANDALONE define is removed because it is already defined in _ASTCFLAGS. YY_NO_INPUT is defined so that the compile survives '--enable-dev-mode'. Also, a Makefile variable "CROSS_COMPILING" is added so that the build system doesn't try to run check_expr2 when cross-compiling, because that will fail the build as will. ASTERISK-28685 #close Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Change-Id: If435b7db9f9ad8266245bda51c81c220f9658915	5 years ago
Sean Bright	e40f248fac	menuselect: Fix curses build on Gentoo Linux ... Because keypad() is exported by libtinfo, it needs to be explicitly added to the linker options. ASTERISK-28487 #close Change-Id: I6c2ad5b95f422c263d078b5c0e84c111807dffc6	6 years ago
Joshua Colp	a8e5cf557d	res_rtp_asterisk: Add support for DTLS packet fragmentation. ... This change adds support for larger TLS certificates by allowing OpenSSL to fragment the DTLS packets according to the configured MTU. By default this is set to 1200. This is accomplished by implementing our own BIO method that supports MTU querying. The configured MTU is returned to OpenSSL which fragments the packet accordingly. When a packet is to be sent it is done directly out the RTP instance. ASTERISK-28018 Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06	6 years ago
George Joseph	93ccff25c6	Merge "app_attended_transfer: new application AttendedTransfer"	6 years ago
Alexei Gradinari	3eaeb3e6c4	app_attended_transfer: new application AttendedTransfer ... AttendedTransfer queues up attended transfer to the given extension. This application can be useful with Custom Dynamic Features. For example to make attended transfer to a predefined number. features.conf ;;; [applicationmap] my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=my_atxfer TRANSFER_CONTEXT=my_transfer [my_atxfer] exten => s,1,AttendedTransfer(1234567890) same => n,Return() [my_transfer] include => default ;;; This application also can be used to completly redefine Attended transfer feature using dialplan. For example: features.conf ;;; [featuremap] atxfer => *7 [applicationmap] custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=custom_atxfer TRANSFER_CONTEXT=my_transfer [custom_atxfer] exten => s,1, same => n,Playback(pbx-transfer) same => n,Read(dest,dial,10,i,3,3) same => n,AttendedTransfer(${dest}) same => n,Return() [my_transfer] include => default ;;; Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b	6 years ago
Alexei Gradinari	745cbab501	app_blind_transfer: new application BlindTransfer ... BlindTransfer redirects all channels currently bridged to the caller channel to the specified destination. This application can be useful with Custom Dynamic Features. For example to make blind transfer to a predefined number. features.conf ;;; [applicationmap] my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=my_blindxfer [my_blindxfer] exten => s,1,BlindTransfer(1234567890,default) same => n,Return() ;;; This application also can be used to completly redefine Blind transfer feature using dialplan. For example: features.conf ;;; [featuremap] blindxfer => [applicationmap] custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=custom_blindxfer [custom_blindxfer] exten => s,1, same => n,Playback(pbx-transfer) same => n,Read(dest,dial,10,i,3,3) same => n,BlindTransfer(${dest},default) same => n,Return() ;;; Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a	6 years ago
Sean Bright	8dc5f86095	menuselect: Add license header to menuselect_gtk.c ... This file was added to the Subversion repository on 2007-03-15 by Russell Bryant, a Digium employee at the time. ASTERISK-24173 #close Change-Id: Ie866fa9d31d550467613d362b35b03c031ee594d	6 years ago
Kevin Harwell	31fba4e869	rtp_engine: rtcp_report_to_json can overflow the ssrc integer value ... When writing an RTCP report to json the code attempts to pack the "ssrc" and "source_ssrc" unsigned integer values as a signed int value type. This of course means if the ssrc's unsigned value is greater than that which can fit into a signed integer value it gets converted to a negative number. Subsequently, the negative value goes out in the json report. This patch now packs the value as a json_int_t, which is the widest integer type available on a given system. This should make it so the value no longer overflows. Note, this was caught by two failing tests hep/rtcp-receiver/ and hep/rtcp-sender. Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0	7 years ago
Sean Bright	3d9deb35f0	autoconf: Check for srtp_get_version_string() before using it ... Change-Id: Id2a916ff9448706090e72ff2c7fb3f5ba24a05df	7 years ago
Alexander Traud	7418dfa2c7	BuildSystem: Enable ncurses for menuselect in Solaris 11. ... The check for the library ncurses should use not use the header <curses.h> but <ncurses.h>, because on some platforms <curses.h> is not a drop-in replacement for <ncurses.h>: For example in Solaris, the symbol initscr is a typedef in <curses.h> to a symbol which does not exist in the library ncurses (initscr32). Simply use <ncurses.h> when you link to ncurses. Furthermore in Solaris, the header <ncurses.h> is in a subdirectory /usr/include/ncurses and not available via pkg-config. ASTERISK-15331 ASTERISK-14935 ASTERISK-12382 ASTERISK-9107 Change-Id: Ife367776b0ccf17d3fefed868245376bfb93745d	7 years ago
Joshua Colp	134e2f0ddc	module: Remove deprecated modules and update support levels. ... I have removed the STATIC_BUILD option immediately as it has not been maintained in many years and is non-functional. ASTERISK-27965 Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7	7 years ago
Matthew Fredrickson	8732d62334	menuselect/menuselect_curses: Resolves sprintf usage error ... Acccording to the man page for sprintf, using the same buffer for output as one used as an input yields undefined behavior. This patch should work around this problem. ASTERISK-27903 Reported-by: Alexander Traud Change-Id: I2213dcb454aff26457e2e4cc9c6821276463ae3a	7 years ago
Alexander Traud	d54637373a	menuselect: Add DragonFly BSD. ... In DragonFly BSD, added libraries from ports are placed into /usr/local. Therefore, this directory must be added for the preprocessor, compiler, and linker. Beside that, the script ./configure was updated: * OSARCH list was outdated and not used, removed. * AC_CANONICAL_BUILD was not used. * _REENTRANT, this feature test macro is obsolete. ASTERISK-27820 Change-Id: I186d88d99cfa4de6569888e12ac97bd2f441c422	7 years ago
Corey Farrell	e40fd7a232	Build System: Strip '-std=c99' from CFLAGS provided by libraries. ... Asterisk requires GNU C extensions. On some systems certain libraries may incorrectly push -std=c99 into CFLAGS, thus breaking the build. This change causes that flag to be stripped so the Asterisk build is not broken by those libraries. This change is made for both pkgconfig and tool based libraries. ASTERISK-27629 #close Change-Id: I13389613b194abbac77becf90cd950dc168704db	7 years ago
Richard Mudgett	c711e4076a	core: Remove ABI effects of MALLOC_DEBUG. ... This allows asterisk to be compiled with MALLOC_DEBUG to load modules built without MALLOC_DEBUG. Now pre-compiled third-party modules will still work regardless of MALLOC_DEBUG being enabled or not. Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10	7 years ago
Corey Farrell	525c0251c0	BuildSystem: Use single bootstrap.sh for Asterisk and menuselect. ... This causes the root bootstrap.sh script to generate configure scripts for both Asterisk and menuselect. This ensures that both configure scripts are generated with the same version of autotools and avoids situations where shared autoconf macros get modified without regenerating the menuselect script. Change-Id: I2bfd8537bbb63b3d46b11efabbb15eaaf9ef731a	7 years ago
Corey Farrell	99535b0497	menuselect: Remove unused dev-mode option TRACE_FRAMES. ... ASTERISK-27575 #close Change-Id: Ica3a522892afed7a96816a5ecf140e1671f46ad4	7 years ago
Corey Farrell	6338a03ce9	menuselect: Fix check for running configure. ... menuselect/Makefile checks that autoconfig.h and makeopts were newer than the '.in' files. Unfortunately running ./configure does not touch autoconfig.h unless the contents will change. Instead of looking at autoconfig.h we just need to ensure that makeopts is newer than configure. Also make change to configure.ac so bootstrap.sh doesn't re-add the extra trailing line-feed. Change-Id: Ief1f831d6717007f9cebb668c14e92782cd2b794	7 years ago
Sean Bright	fd0ca1c3f9	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	7 years ago
Corey Farrell	1b80ffa495	Fix Common Typo's. ... Fix instances of: * Retreive * Recieve * other then * different then * Repeated words ("the the", "an an", "and and", etc). * othterwise, teh ASTERISK-24198 #close Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31	7 years ago
Corey Farrell	6a67828b46	menuselect: Tweak check for recently run configure. ... Recently menuselect has randomly produced an error stating that configure was just run and make had to be restarted. I believe this is due to an incorrect menuselect/Makefile rule. The original rule produced an error if makeopts or autoconfig.h were older than makeopts.in or autoconfig.h.in. I believe this can create an issue if makeopts is older than autoconfig.h.in or if autoconfig.h is older than makeopts.in. The new rules compare files independently. Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b	7 years ago
Corey Farrell	ce5cfc8ffb	autoconf: Use m4 conditionals where possible. ... Change-Id: I530c0a72f965437acef6a9a4fbfe5c487f078b65	8 years ago
Corey Farrell	b9f4bb5988	menuselect: Remove ineffective weak attribute detection. ... menuselect detects compiler support for multiple styles of weak functions. This is a remnant from 2013 when OPTIONAL_API required weak functions. It is no longer correct for menuselect to switch dependencies from optional to required based on lack of weak function support. Note an issue remains - dependencies should switch from optional to required based on OPTIONAL_API being enabled or disabled. I don't think this is possible. menuselect needs to know at startup if OPTIONAL_API is enabled or disabled, so the only way to fix this is to remove OPTIONAL_API from menuselect and create a configure option. I've left the code that switches in place but it's preprocessed out. Additionally removed: - WEAKREF variable from Asterisk makeopts.in. - Related disabled code from test_utils. - Pointless AC_REVISION call from menuselect/configure.ac. Change-Id: Ifa702e5f98eb45f338b2f131a93354632a8fb389	8 years ago
Corey Farrell	96987737b9	menuselect: Delete and ignore aclocal.m4. ... This file is temporary output from the bootstrap.sh command, it does not need to be committed. Change-Id: Ie0fd113aff6eac44924c0bd0c900833c6c86a6d9	8 years ago
frahaase	094c26aa68	Binaural synthesis (confbridge): Adds binaural synthesis to bridge_softmix. ... Adds binaural synthesis to bridge_softmix (via convolution using libfftw3). Binaural synthesis is conducted at 48kHz. For a conference, only one spatial representation is rendered. The default rendering is applied for mono-capable channels. ASTERISK-26292 Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf	8 years ago
Tzafrir Cohen	18a6f250e2	menuselect: invalid test for GTK2 ... configuire.ac was only checking for the existence of pkg-config and not the gtk2 package itself. Now it calls AST_PKG_CONFIG_CHECK for gtk+-2.0. ASTERISK-26356 #close Change-Id: I93e9d0166341f0e7f84b52955bb6f81da42f2ef6	9 years ago
George Joseph	f6276441b1	menuselect: Add an opaque "member_data" string to the acceptable xml ... Change-Id: Id5ac43b95c8d7395f3be37f983632169db3d1afe	9 years ago
David M. Lee	8802e55c26	Replace strdupa with more portable ast_strdupa ... The strdupa function is a GNU extension, and not widely portable. We have an ast_strdupa function used within Asterisk which is preferred. I pulled the definition up from menuselect.c into the menuselect.h header file so it can be shared across menuselect. Change-Id: I9593c97f78386b47dc1e83201e80cb2f62b36c2e	9 years ago
George Joseph	b4c5dcad01	menuselect: Various menuselect enhancements ... * Add 'external' as a support level. * Add ability for module directories to add entries to the menu by adding members to the <module_prefix>/<module_prefix>.xml file. * Expand the description field to 3 lines in the ncurses implementation. * Allow the description field to wrap in the newt implementation. * Add description field to the gtk implementation. Change-Id: I7f9600a1984a42ce0696db574c1051bc9ad7c808	9 years ago
George Joseph	0af6b5de62	build_system: Split COMPILE_DOUBLE from DONT_OPTIMIZE ... I can't ever recall actually needing the intermediate files or the checking that a double compile produces. What I CAN remember is every DONT_OPTIMIZE build needing 3 invocations of gcc instead of 1 just to do the checks and produce those intermediate files. Having said that, Richard pointed out that the reason for the double compile was that there were cases in the past where a submitted patch failed to compile because the submitter never tried it with the optimizations turned on. To get the best of both worlds, COMPILE_DOUBLE has been split into its own option. If DONT_OPTIMIZE is turned on, COMPILE_DOUBLE will also be selected BUT you can then turn it off if all you need are the debugging symbols. This way you have to make an informed decision about disabling COMPILE_DOUBLE. To allow COMPILE_DOUBLE to be both auto-selected and turned off, a new feature was added to menuselect. The <use> element can now contain an "autoselect" attribute which will turn the used member on but not create a hard dependency. The cflags.xml implementation for COMPILE_DOUBLE looks like this... <member name="DONT_OPTIMIZE" displayname="Disable Optimizations ..."> <use autoselect="yes">COMPILE_DOUBLE</use> <support_level>core</support_level> </member> <member name="COMPILE_DOUBLE" displayname="Pre-compile with ...> <depend>DONT_OPTIMIZE</depend> <support_level>core</support_level> </member> When DONT_OPTIMIZE is turned on, COMPILE_DOUBLE is turned on because of the use. When DONT_OPTIMIZE is turned off, COMPILE_DOUBLE is turned off because of the depend. When COMPILE_DOUBLE is turned on, DONT_OPTIMIZE is turned on because of the depend. When COMPILE_DOUBLE is turned off, DONT_OPTIMIZE is left as is because it only uses COMPILE_DOUBLE, it doesn't depend on it. I also made a few tweaks to the ncurses implementation to move things left a bit to allow longer descriptions. Change-Id: Id49ca930ac4b5ec4fc2d8141979ad888da7b1611	9 years ago
ibercom	f897f36721	weakref attribute detection broken with gcc 4.6 and higher ... GCC 4.7 Manual: http://gcc.gnu.org/onlinedocs/gcc-4.7.4/gcc/Function-Attributes.html weakref ("target") A weak reference is an alias that does not by itself require a definition to be given for the target symbol. ASTERISK-22559 #close Reported by: Ibercom Change-Id: I36a136cae947b65187a697533416f9ff9a0b8cdf	10 years ago
George Joseph	bf46ef35ca	.gitignore updates for master/13 ... Added products of ./bootstrap Added nmenuselect and gmenuselect to menuselect/ Change-Id: Ied658463958bafc04a9aff9ebc28e40c116a6e35	10 years ago
George Joseph	b35e184d41	Add .gitignore and .gitreview files ... Add the .gitignore and .gitreview files to the asterisk repo. NB: You can add local ignores to the .git/info/exclude file without having to do a commit. Common ignore patterns are in the top-level .gitignore file. Subdirectory-specific ignore patterns are in their own .gitignore files. Change-Id: I842a1588ff27d8a0189f12d597f0a7af033d6c69 Tested-by: George Joseph	10 years ago
Kinsey Moore	2362d88a18	Menuselect: Fix incorrect enabling on failed deps ... This corrects a situation where menuselect can incorrectly enable a module by default that has defaultenabled set to "no" and has failed/non-selected dependencies. The bug is due to an inverted test when checking for whether the given module should be set to enabled by default on load. Review: https://reviewboard.asterisk.org/r/3975/ Reported by: John Bigelow ........ Merged revisions 422646 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422647 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Sean Bright	dd23637195	Update config.guess and config.sub ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418895 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Sean Bright	84b9f5eff5	Import Asterisk's autoconf magic instead of using our own. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418893 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago