156 Commits (18.17)

Author	SHA1	Message	Date
Naveen Albert	ec0ca7dcbc	res_pjsip_session: Add overlap_context option. ... Adds the overlap_context option, which can be used to explicitly specify a context to use for overlap dialing extension matches, rather than forcibly using the context configured for the endpoint. ASTERISK-30262 #close Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db	2 years ago
Michael Kuron	d73f22268f	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip ... chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	2 years ago
Henning Westerholt	093593a7c8	res_pjsip: return all codecs on a re-INVITE without SDP ... Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Maximilian Fridrich	675bed5f2c	res_pjsip: Add mediasec capabilities. ... This patch adds support for mediasec SIP headers and SDP attributes. These are defined in RFC 3329, 3GPP TS 24.229 and draft-dawes-sipcore-mediasec-parameter. The new features are implemented so that a backbone for RFC 3329 is present to streamline future work on RFC 3329. With this patch, Asterisk can communicate with Deutsche Telekom trunks which require these fields. ASTERISK-30032 Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2	3 years ago
Maximilian Fridrich	479ce16eba	res_pjsip: Add 100rel option "peer_supported". ... This patch adds a new option to the 100rel parameter for pjsip endpoints called "peer_supported". When an endpoint with this option receives an incoming request and the request indicated support for the 100rel extension, then Asterisk will send 1xx responses reliably. If the request did not indicate 100rel support, Asterisk sends 1xx responses normally. ASTERISK-30158 Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad	3 years ago
Mike Bradeen	c49a2c46f6	alembic: add missing ps_endpoints columns ... The following required columns were missing, now added to the ps_endpoints table: incoming_call_offer_pref outgoing_call_offer_pref stir_shaken_profile ASTERISK-29453 Change-Id: I5cf565edf30195844d6acbc1e1de8c5f0d837568	3 years ago
George Joseph	cdbd973ecd	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
Kevin Harwell	0ddbf6bc45	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago
Naveen Albert	b81fbbc6dc	res_pjsip_outbound_registration: Make max random delay configurable. ... Currently, PJSIP will randomly wait up to 10 seconds for each outbound registration's initial attempt. The reason for this is to avoid having all outbound registrations attempt to register simultaneously. This can create limitations with the test suite where we need to be able to receive inbound calls potentially within 10 seconds of starting up. For instance, we might register to another server and then try to receive a call through the registration, but if the registration hasn't happened yet, this will fail, and hence this inconsistent behavior can cause tests to fail. Ultimately, this requires a smaller random value because there may be no good reason to wait for up to 10 seconds in these circumstances. To address this, a new config option is introduced which makes this maximum delay configurable. This allows, for instance, this to be set to a very small value in test systems to ensure that registrations happen immediately without an unnecessary delay, and can be used more generally to control how "tight" the initial outbound registrations are. ASTERISK-29965 #close Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd	3 years ago
Mark Petersen	16e59db514	chan_pjsip: add allow_sending_180_after_183 option ... added new global config option "allow_sending_180_after_183" that if enabled will preserve 180 after a 183 ASTERISK-29842 Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18	3 years ago
Alexei Gradinari	e2423c6f49	res_pjsip_pubsub: provide a display name for RLS subscriptions ... Whereas BLFs allow to show a display name for each RLS entry, the asterisk provides only the extension now. This is not end user friendly. This commit adds a new resource_list option, resource_display_name, to indicate whether display name of resource or the resource name being provided for RLS entries. If this option is enabled, the Display Name will be provided. This option is disabled by default to remain the previous behavior. If the 'event' set to 'presence' or 'dialog' the non-empty HINT name will be set as the Display Name. The 'message-summary' is not supported yet. ASTERISK-29891 #close Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681	3 years ago
Josh Soref	2a8b651b7e	contrib: Spelling fixes ... Correct typos of the following word families: standard increase comments valgrind promiscuous editing libtonezone storage aggressive whitespace russellbryant consecutive peternixon ASTERISK-29714 Change-Id: I9cafbf41b579c9c0c84c81719d2c4f900beec245	4 years ago
Matthew Kern	15e432220c	res_pjsip_t38: bind UDPTL sessions like RTP ... In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the fallback use of the transport's bind address solve problems sending media on systems that cannot send ipv4 packets on ipv6 sockets, and certain other situations. This change extends both of these behaviors to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific problems on these systems, introducing a new option endpoint/t38_bind_udptl_to_media_address. ASTERISK-29402 Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557	4 years ago
Joseph Nadiv	4368764032	res_pjsip_registrar: Remove unavailable contacts if exceeds max_contacts ... The behavior of max_contacts and remove_existing are connected. If remove_existing is enabled, the soonest expiring contacts are removed. This may occur when there is an unavailable contact. Similarly, when remove_existing is not enabled, registrations from good endpoints are rejected in favor of retaining unavailable contacts. This commit adds a new AOR option remove_unavailable, and the effect of this setting will depend on remove_existing. If remove_existing is set to no, we will still remove unavailable contacts when they exceed max_contacts, if there are any. If remove_existing is set to yes, we will prioritize the removal of unavailable contacts before those that are expiring soonest. ASTERISK-29525 Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784	4 years ago
Sean Bright	d2dcd15bd8	res_pjsip.c: OPTIONS processing can now optionally skip authentication ... ASTERISK-27477 #close Change-Id: I68f6715bba92a525149e35d142a49377a34a1193	4 years ago
Sean Bright	35302efe73	app_queue: Add alembic migration to add ringinuse to queue_members. ... ASTERISK-28356 #close Change-Id: I53a1bfdd3113d620bea88349019173a2f3f0ae39	4 years ago
Torrey Searle	83140c9fed	res_pjsip_diversion: implement support for History-Info ... Implemention of History-Info capable of interworking with Diversion Header following RFC7544 ASTERISK-29027 #close Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6	5 years ago
Sungtae Kim	1fd12b88c7	realtime: Increased reg_server character size ... Currently, the ps_contacts table's reg_server column in realtime database type is varchar(20). This is fine for normal cases, but if the hostname is longer than 20, it returns error and then failed to register the contact address of the peer. Normally, 20 characters limitation for the hostname is fine, but with the cloud env. So, increased the size to 255. ASTERISK-29056 Change-Id: Iac52c8c35030303cfa551bb39f410b33bffc507d	5 years ago
George Joseph	802aa97fa0	ACN: Configuration renaming for pjsip endpoint ... This change renames the codec preference endpoint options. incoming_offer_codec_prefs becomes codec_prefs_incoming_offer to keep the options together when showing an endpoint. Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d	5 years ago
Ben Ford	5fbed5af24	res_stir_shaken: Add stir_shaken option and general improvements. ... Added a new configuration option for PJSIP endpoints - stir_shaken. If set to yes, then STIR/SHAKEN support will be added to inbound and outbound INVITEs. The default is no. Alembic has been updated to include this option. Previously the dialplan function was not trimming the whitespace from the parameters it recieved. Now it does. Also added a conditional that, when TEST_FRAMEWORK is enabled, the timestamp in the identity header will be overlooked. This is just for testing, since the testsuite will rely on a SIPp scenario with a preset identity header to trigger the MISMATCH result. Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1	5 years ago
George Joseph	2d22e34206	ACN: res_pjsip endpoint options ... This commit adds the endpoint options required to control Advanced Codec Negotiation. incoming_offer_codec_prefs outgoing_offer_codec_prefs incoming_answer_codec_prefs outgoing_answer_codec_prefs The documentation may need tweaking and some additional edits added, especially for the "answer" prefs. That'll be handled when things finalize. This commit is safe to merge as it doens't alter any existing functionality nor does it alter the previous codec negotiation work which may now be obsolete. Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11	5 years ago
sungtae kim	81b5e4a73f	res_pjsip.c: Added disable_rport option for pjsip.conf ... Currently when the pjsip making an outgoing request, it keep adding the rport parameter in a request message as a default. This causes unexpected rport handle at the other end. Added option for disable this behaviour in the pjsip.conf. This is a system option, but working as a gloabl option. ASTERISK-28959 Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc	5 years ago
Rodrigo Ramírez Norambuena	48161dfc71	queue_log: Add alembic script for generate db table for queue_log ... Change-Id: I35b928a6251f9da9a1742b2cd14c63a00c3d0f0c	6 years ago
Sean Bright	966488ab52	res_musiconhold: Add new 'playlist' mode ... Allow the list of files to be played to be provided explicitly in the music class's configuration. The primary driver for this change is to allow URLs to be used for MoH. Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa	6 years ago
Dan Cropp	cffa2a74cb	res_pjsip: Added a norefersub configuration setting ... Added a new PJSIP global setting called norefersub. Default is true to keep support working as before. res_pjsip_refer: Configures PJSIP norefersub capability accordingly. Checks the PJSIP global setting value. If it is true (default) it adds the norefersub capability to PJSIP. If it is false (disabled) it does not add the norefersub capability to PJSIP. This is useful for Cisco switches that do not follow RFC4488. ASTERISK-28375 #close Reported-by: Dan Cropp Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9	6 years ago
Ben Ford	4edd24841d	alembic: Fix errors during upgrade head. ... When trying to upgrade using alembic, a couple different errors kept popping up that prevented the upgrade. An additional parameter was needed when changing the schema for mwi_subscribe_replaces_unsolicited from an integer to an enum. When changing from a string to an enum, the type needed to be cast for postgresql. The other issue was a parameter being used during column creation that did not exist. After fixing the upgrade process, it revealed errors with the downgrade process. One was a variable not being defined in the downgrade function, and the other was tables not existing when using MySQL. This was due to a context check that should have encompassed MySQL, but in the end was not doing so. Change-Id: Ib4d70cf3ce5080023a50be496272a777b55d6c8e	6 years ago
Torrey Searle	4661c08549	chan_pjsip: add a flag to ignore 183 responses if no SDP present ... chan_sip will always ignore 183 responses that do not contain SDP however, chan_pjsip will currently always translate it into a 183 with SDP. This new flag allows chan_pjsip to have the same behavior as chan_sip. ASTERISK-28322 #close Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a	6 years ago
George Joseph	c2adeb9dc2	taskprocessor: Enable subsystems and overload by subsystem ... To prevent one subsystem's taskprocessors from causing others to stall, new capabilities have been added to taskprocessors. * Any taskprocessor name that has a '/' will have the part before the '/' saved as its "subsystem". Examples: "sorcery/acl-0000006a" and "sorcery/aor-00000019" will be grouped to subsystem "sorcery". "pjsip/distributor-00000025" and "pjsip/distributor-00000026" will bn grouped to subsystem "pjsip". Taskprocessors with no '/' have an empty subsystem. * When a taskprocessor enters high-water alert status and it has a non-empty subsystem, the subsystem alert count will be incremented. * When a taskprocessor leaves high-water alert status and it has a non-empty subsystem, the subsystem alert count will be decremented. * A new api ast_taskprocessor_get_subsystem_alert() has been added that returns the number of taskprocessors in alert for the subsystem. * A new CLI command "core show taskprocessor alerted subsystems" has been added. * A new unit test was addded. REMINDER: The taskprocessor code itself doesn't take any action based on high-water alerts or overloading. It's up to taskprocessor users to check and take action themselves. Currently only the pjsip distributor does this. * A new pjsip/global option "taskprocessor_overload_trigger" has been added that allows the user to select the trigger mechanism the distributor uses to pause accepting new requests. "none": Don't pause on any overload condition. "global": Pause on ANY taskprocessor overload (the default and current behavior) "pjsip_only": Pause only on pjsip taskprocessor overloads. * The core pjsip pool was renamed from "SIP" to "pjsip" so it can be properly grouped into the "pjsip" subsystem. * stasis taskprocessor names were changed to "stasis" as the subsystem. * Sorcery core taskprocessor names were changed to "sorcery" to match the object taskprocessors. Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56	6 years ago
Alexei Gradinari	f0546d1d87	res_pjsip: add option to enable ContactStatus event when contact is updated ... The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out the ContactStatus AMI event when a contact is updated. Thist change broke things which rely on old behavior. This patch adds a new PJSIP global configuration option 'send_contact_status_on_update_registration' to be able to preserve old ContactStatus behavior. By default new behavior, i.e. the ContactStatus event will not be sent when a device refreshes its registration. Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46	6 years ago
Kevin Harwell	cbb7633ad3	pjsip_add_use_callerid_contact: fixed alembic script ... Change-Id: I413f1583c797fb79651786cd8d0b003599f8ed10	6 years ago
George Joseph	5ea16f0cb5	Merge "alembic: Fix use_callerid_contact option add script."	7 years ago
Richard Mudgett	c7528f16e6	alembic: Fix use_callerid_contact option add script. ... ASTERISK-28087 Change-Id: I046d018015427d0916fab571b5a4f5367476f729	7 years ago
Alexei Gradinari	eee935983b	pjsip: new endpoint's options to control Connected Line updates ... This patch adds new options 'trust_connected_line' and 'send_connected_line' to the endpoint. The option 'trust_connected_line' is to control if connected line updates are accepted from this endpoint. The option 'send_connected_line' is to control if connected line updates can be sent to this endpoint. The default value is 'yes' for both options. Change-Id: I16af967815efd904597ec2f033337e4333d097cd	7 years ago
Torrey Searle	cac4ccef25	res_pjsip_session: add new flag use_callerid_contact ... Add a new global flag to res_pjsip to allow the callerid to be used as the username in the contact header. This allows chan_pjsip to have the same behavour as chan_sip ASTERISK-28087 #close Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95	7 years ago
Nick French	37b2e68628	res_pjsip: Implement additional SIP RFCs for Google Voice trunk compatability ... This change implements a few different generic things which were brought on by Google Voice SIP. 1. The concept of flow transports have been introduced. These are configurable transports in pjsip.conf which can be used to reference a flow of signaling to a target. These have runtime configuration that can be changed by the signaling itself (such as Service-Routes and P-Preferred-Identity). When used these guarantee an individual connection (in the case of TCP or TLS) even if multiple flow transports exist to the same target. 2. Service-Routes (RFC 3608) support has been added to the outbound registration module which when received will be stored on the flow transport and used for requests referencing it. 3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been added to the outbound registration module. If a P-Associated-URI header is received it will be used on requests as the P-Preferred-Identity. 4. Configurable outbound extension support has been added to the outbound registration module. When set the extension will be placed in the Supported header. 5. Header parameters can now be configured on an outbound registration which will be placed in the Contact header. 6. Google specific OAuth / Bearer token authentication (draft-ietf-sipcore-sip-authn-02) has been added to the outbound registration module. All functionality changes are controlled by pjsip.conf configuration options and do not affect non-configured pjsip endpoints otherwise. ASTERISK-27971 #close Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58	7 years ago
Florian Floimair	6a1c313fac	alembic: fix suppress_q850_reason_headers column name ... In the original commit introducing the feature the column in the alembic script was called 'suppress_q850_reason_header'. In the code however the option is called 'suppress_q850_reason_headers' (trailing 's'). This leads to errors when ARI push configuration is used. Change-Id: Ie84808adbca6fcc9136556e4f5d741adbef5d14f	7 years ago
Richard Mudgett	d60411a2b4	res_pjsip: Fix mwi_subscribe_replaces_unsolicited type mismatch ... ASTERISK-27988 Change-Id: Iccafdd0552ea8aaed647620fb14499f1bf341843	7 years ago
Florian Floimair	3bdbbb7637	alembic: increase uri column size ... When mobile SIP clients register with Asterisk that use some sort of push notifications, the URI can get quite lengthy due to the additional push-service annotations (things like tokens, pn-type, etc.) contained in it. ASTERISK-28022 #close Change-Id: I4c7ceadc3bb405f3daf722641c8cd5ca4188cc37	7 years ago
George Joseph	8f42447c68	res_pjsip: Add 'suppress_q850_reason_headers' option to endpoint ... A new option 'suppress_q850_reason_headers' has been added to the endpoint object. Some devices can't accept multiple Reason headers and get confused when both 'SIP' and 'Q.850' Reason headers are received. This option allows the 'Q.850' Reason header to be suppressed. The default value is 'no'. ASTERISK-27949 Reported-by: Ross Beer Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1	7 years ago
George Joseph	880fbff6b7	res_pjsip_session: Add ability to accept multiple sdp answers ... pjproject by default currently will follow media forked during an INVITE on outbound calls if the To tag is different on a subsequent response as that on an earlier response. We handle this correctly. There have been reported cases where the To tag is the same but we still need to follow the media. The pjproject patch in this commit adds the capability to sip_inv and also adds the capability to control it at runtime. The original "different tag" behavior was always controllable at runtime but we never did anything with it and left it to default to TRUE. So, along with the pjproject patch, this commit adds options to both the system and endpoint objects to control the two behaviors, and a small logic change to session_inv_on_media_update in res_pjsip_session to control the behavior at the endpoint level. The default behavior for "different tags" remains the same at TRUE and the default for "same tag" is FALSE. Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6 ASTERISK-27936 Reported-by: Ross Beer	7 years ago
George Joseph	2b9aa6b5bb	res_pjsip_pubsub: Prune subs with reliable transports at startup ... In an earlier release, inbound registrations on a reliable transport were pruned on Asterisk restart since the TCP connection would have been torn down and become unusable when Asterisk stopped. This same process is now also applied to inbound subscriptions. Also fixed issues in res_pjsip_registrar where it wasn't handling the monitoring correctly when multiple registrations came in over the same transport. To accomplish this, the pjsip_transport_event feature needed to be refactored to allow multiple monitors (multiple subcriptions or registrations from the same endpoint) to exist on the same transport. Since this changed the API, any external modules that may have used the transport monitor feature (highly unlikey) will need to be changed. ASTERISK-27612 Reported by: Ross Beer Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36	7 years ago
Richard Mudgett	8494e78010	res_pjsip: Split type=identify to IP address and SIP header matching priorities ... The type=identify endpoint identification method can match by IP address and by SIP header. However, the SIP header matching has limited usefulness because you cannot specify the SIP header matching priority relative to the IP address matching. All the matching happens at the same priority and the order of evaluating the identify sections is indeterminate. e.g., If you had two type=identify sections where one matches by IP address for endpoint alice and the other matches by SIP header for endpoint bob then you couldn't predict which endpoint is matched when a request comes in that matches both. * Extract the SIP header matching criteria into its own "header" endpoint identification method so the user can specify the relative priority of the SIP header and the IP address matching criteria in the global endpoint_identifier_order option. The "ip" endpoint identification method now only matches by IP address. ASTERISK-27491 Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095	7 years ago
Sean Bright	fd0ca1c3f9	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	7 years ago
Rodrigo Ramírez Norambuena	5335ad117d	app_queue: Add feature to set wrapuptime on the queue member ... This patch adds the ability to set the wrapuptime on the queue member config. When the option is set the wrapuptime on the queue member is used instead of the queue's wrapuptime. ASTERISK-27483 #close Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902	7 years ago
Sean Bright	04d3785a79	dtls: Add support for ephemeral DTLS certificates. ... This mimics the behavior of Chrome and Firefox and creates an ephemeral X.509 certificate for each DTLS session. Currently, the only supported key type is ECDSA because of its faster generation time, but other key types can be added in the future as necessary. ASTERISK-27395 Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4	8 years ago
Florian Floimair	3052b56423	alembic: Add bundle column in ps_endpoints table ... The ps_endpoints table was missing the bundle column introduced with the bundle feature in commit 065c3005ad. ASTERISK-27374 #close Change-Id: Ic900f4f2c20f64b99ea898d50f5c0a7117472d46	8 years ago
Joshua Colp	9e1fbab382	res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint. ... When the identify_by option on an endpoint is set to ip it will only be identified using the res_pjsip_endpoint_identifier_ip module. This ensures that it is not mistakenly matched using the username of the From header. To ensure behavior has not changed the default has been changed to "username,ip" for the identify_by option. ASTERISK-27206 Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd	8 years ago
George Joseph	446d48fd49	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	8 years ago
Jenkins2	ec940f4fec	Merge "alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode"	8 years ago
George Joseph	f9bad3bd61	alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode ... The downgrade function was missing "_v2" at the end of the alter column type. Change-Id: Iaa9bcef48d6f3590ce07a61342d8e66f00263d8e	8 years ago