679 Commits (18.17)

Author	SHA1	Message	Date
Mike Bradeen	24e27a3c6e	res_pjsip: Upgraded bundled pjsip to 2.13 ... Removed multiple patches. Code chages in res_pjsip_pubsub due to changes in evsub. Pjsip now calls on_evsub_state() before on_rx_refresh(), so the sub tree deletion that used to take place in on_evsub_state() now must take place in on_rx_refresh(). Additionally, pjsip now requires that you send the NOTIFY from within on_rx_refresh(), otherwise it will assert when going to send the 200 OK. The idea is that it will look for this NOTIFY and cache it until after sending the response in order to deal with the self-imposed message mis-order. Asterisk previously dealt with this by pushing the NOTIFY in on_rx_refresh(), but pjsip now forces us to use it's method. Changes were required to configure in order to detect which way pjsip handles this as the two are not compatible for the reasons mentioned above. A corresponding change in testsuite is required in order to deal with the small interal timing changes caused by moving the NOTIFY send. ASTERISK-30325 Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f	2 years ago
Philip Prindeville	47e49f93fa	test: Add test coverage for capture child process output ... ASTERISK-30037 #close Change-Id: I0273e85eeeb6b8e46703f24cd74d84f3daf0a69a	3 years ago
Joshua C. Colp	f97e9aed85	pjsip: Add TLS transport reload support for certificate and key. ... This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
Hugh McMaster	b678624f04	configure.ac: Use pkg-config to detect libxml2 ... Use pkg-config to detect libxml2, falling back to xml2-config if the former is not available. This patch ensures Asterisk continues to build on systems without xml2-config installed. The patch also updates the associated 'configure' files. ASTERISK-29970 #close Change-Id: I3c90dfe0b0590486cbb8e6d426a7c5c4199410c0	3 years ago
George Joseph	b6e482becd	xml.c, config,c: Add stylesheets and variable list string parsing ... Added functions to open, close, and apply XML Stylesheets to XML documents. Although the presence of libxslt was already being checked by configure, it was only happening if xmldoc was enabled. Now it's checked regardless. Added ability to parse a string consisting of comma separated name/value pairs into an ast_variable list. The reverse of ast_variable_list_join(). Change-Id: I1e1d149be22165a1fb8e88e2903a36bba1a6cf2e	3 years ago
Michał Górny	7b1e5fa34a	BuildSystem: Fix misdetection of gethostbyname_r() on NetBSD ... Fix the configure script not to detect the presence of gethostbyname_r() on NetBSD incorrectly. NetBSD includes it as an internal libc symbol that is not exposed in system headers and that is incompatible with other implementations. In order to avoid misdetecting it, perform the symbol check only if the declaration is found in the public header first. ASTERISK-29817 Change-Id: Iafa359b09908251bcd299ff54be003ea129b9eda	3 years ago
George Joseph	3f093b8dda	bundled_pjproject: Make it easier to hack ... There are times when you need to troubleshoot issues with bundled pjproject or add new features that need to be pushed upstream but... * The source directory created by extracting the pjproject tarball is not scanned for code changes so you have to keep forcing rebuilds. * The source directory isn't a git repo so you can't easily create patches, do git bisects, etc. * Accidentally doing a make distclean will ruin your day by wiping out the source directory, and your changes. * etc. This commit makes that easier. See third-party/pjproject/README-hacking.md for the details. ASTERISK-29824 Change-Id: Idb1251040affdab31d27cd272dda68676da9b268	3 years ago
Alexander Traud	53610679bf	BuildSystem: Consistently allow 'ye' even for Jansson. ... Furthermore, consistently use not 'No' but ':' for non-existent file paths. Finally, use the same pattern for checking file paths: a) = ":" b) != "x:" Change-Id: I0c80c76d2cc98b0e5c859131290f4e3141a1a544	3 years ago
Alexander Traud	608e52c939	BuildSystem: In POSIX sh, == in place of = is undefined. ... ASTERISK-29724 Change-Id: I59aa0e52effdc16992f3a736ccf73430a6ef135b	4 years ago
Alexander Traud	95da40cd50	res_snmp: As build tool, prefer pkg-config over net-snmp-config. ... ASTERISK-29709 Change-Id: Ie169df878bdfc3a06b3097c5c38d185b480f54d4	4 years ago
George Joseph	c07e3c2f4d	BuildSystem: Check for alternate openssl packages ... OpenSSL is one of those packages that often have alternatives with later versions. For instance, CentOS/EL 7 has an openssl package at version 1.0.2 but there's an openssl11 package from the epel repository that has 1.1.1. This gets installed to /usr/include/openssl11 and /usr/lib64/openssl11. Unfortunately, the existing --with-ssl and --with-crypto ./configure options expect to point to a source tree and don't work in this situation. Also unfortunately, the checks in ./configure don't use pkg-config. In order to make this work with the existing situation, you'd have to run... ./configure --with-ssl=/usr/lib64/openssl11 \ --with-crypto=/usr/lib64/openssl11 \ CFLAGS=-I/usr/include/openssl11 BUT... those options don't get passed down to bundled pjproject so when you run make, you have to include the CFLAGS again which is a big pain. Oh... To make matters worse, although you can specify PJPROJECT_CONFIGURE_OPTS on the ./configure command line, they don't get saved so if you do a make clean, which will force a re-configure of bundled pjproject, those options don't get used. So... * In configure.ac... Since pkg-config is installed by install_prereq anyway, we now use it to check for the system openssl >= 1.1.0. If that works, great. If not, we check for the openssl11 package. If that works, great. If not, we fall back to just checking for any openssl. If pkg-config isn't installed for some reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified on the ./configure command line, we fall back to the existing logic that uses AST_EXT_LIB_CHECK(). * The whole OpenSSL check process has been moved up before THIRD_PARTY_CONFIGURE(), which does the initial pjproject bundled configure, is run. This way the results of the above checks, which may result in new include or library directories, is included. * Although not strictly needed for openssl, We now save the value of PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used again if a re-configure is triggered. ASTERISK-29693 Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde	4 years ago
Sean Bright	482281deff	configure: Remove unused OpenSSL SRTP check. ... Discovered while looking at ASTERISK~29684. Usage was removed in change I3c77c7b00b2ffa2e935632097fa057b9fdf480c0. Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3	4 years ago
Sean Bright	689c703b2c	dns.c: Load IPv6 DNS resolvers if configured. ... IPv6 nameserver addresses are stored in different part of the __res_state structure, so look there if we appear to have support for it. ASTERISK-28004 #close Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d	4 years ago
Jaco Kroon	9c56870929	AC_HEADER_STDC causes a compile failure with autoconf 2.70 ... From https://www.mail-archive.com/bug-autoconf@gnu.org/msg04408.html > ... the long-obsolete AC_HEADER_STDC, previously used internally by > AC_INCLUDES_DEFAULT, used AC_EGREP_HEADER. The AC_HEADER_STDC macro > is now a no-op (and is not used at all within Autoconf anymore), so > that change is likely what made the first use of AC_EGREP_HEADER the > one inside the if condition, causing the observed results. The implication is that the test does nothing anyway, and due to it being a no-op from 2.70 onwards, results in the required not being set to yes, resulting in ./configure to fail. Change-Id: Ic1ff38d87f791fbf1f2a80512f81bb7110392460 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	4 years ago
Jaco Kroon	49f625b8db	pbx_lua: Add LUA_VERSIONS environment variable to ./configure. ... On Gentoo it's possible to have multiple lua versions installed, all with a path of /usr, so it's not possible to use the current --with-lua option to determisticly pin to a specific version as is required by the Gentoo PMS standards. This environment variable allows to lock to specific versions, unversioned check will be skipped if this variable is supplied. Change-Id: I8c403eda05df25ee0193960262ce849c7d2fd088 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	4 years ago
lvl	92fcd4edba	Introduce astcachedir, to be used for temporary bucket files ... As described in the issue, /tmp is not a suitable location for a large amount of cached media files, since most distributions make /tmp a RAM-based tmpfs mount with limited capacity. I opted for a location that can be configured separately, as opposed to using a subdirectory of spooldir, given the different storage profile (transient files vs files that might stay there indefinitely). This commit just makes the cache directory configurable, but leaves it at /tmp by default, to ensure backwards compatibility. A future commit that only targets master could change the default location to something more sensible such as /var/tmp/asterisk. At that point, the cachedir could be created and cleaned up during uninstall by the Makefile script. ASTERISK-29143 Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d	4 years ago
Alexander Traud	2773f93154	BuildSystem: Enable Lua 5.4. ... Note to maintainers: Lua 5.4, Lua 5.3, and Lua 5.2 have not been tested at runtime with pbx_lua. Until then, use the lowest available version of Lua, if you enabled the module pbx_lua at all. Change-Id: Ie5270448b11fcb4e2a53d899e4fe7fea793ce7e0	5 years ago
Alexander Traud	0a4dffe6f8	pjproject_bundled: Honor --without-pjproject. ... The previous change missed that 'make' uses 'PJPROJECT_BUNDLED' anyway. ASTERISK-28929 Change-Id: I7ef0e78a06ea391b59d95b99d46bbed3fec4fed9	5 years ago
Alexander Traud	4ef5ba58f5	BuildSystem: Only if found LibPRI, check its optional parts. ... Change-Id: If8445f899ee4ce0c606c484943d4ce0c8e43b5da	5 years ago
Alexander Traud	ef580f96e7	BuildSystem: Only if found external PJProject, check its optional parts. ... Change-Id: I11d5693d25c166c99d8cebffc16184d58f6362de	5 years ago
Alexander Traud	610e058189	BuildSystem: Search for Python/C API when possibly needed only. ... The Python/C API is used only if the Test Framework was enabled in Asterisk 'make menuselect'. The Test Framework is available only if the Developer Mode was enabled in Asterisk './configure --enable-dev-mode'. And that Python/C API is used only if the PJProject was found and not disabled in Asterisk; the user did not go for './configure --without-pjproject'. Furthermore, because version 2 of that Python/C API is required (currently) and because some platforms do not offer a generic version 2, the script searches for 2.7 explicitly as well. To avoid version mismatch between the Python/C API and the Python environment, the script searches for the latter in the same versions, in the same the order as well. Because this Python/C API is just for (some) Asterisk contributors, the script also goes for the Python 3 environment as a last resort for all other Asterisk users. This allows 'make full' even on minimal installations of Ubuntu 18.04 LTS and newer. Because the Python/C API is Asterisk contributor specific, the Python packages are removed from the script './contrib/scripts/install_prereq' as this script is intended for Asterisk users. Asterisk contributors have to install much more packages in any case, like: sudo apt install autoconf automake git git-review python2.7-dev ASTERISK-28824 ASTERISK-27717 Change-Id: Id46d357e18869f64dcc217b8fdba821b63eeb876	5 years ago
traud	7cdb493a1e	BuildSystem: Remove doc/tex and doc/pdf leftovers. ... Furthermore, the nowhere used compress is removed. ASTERISK-28816 Change-Id: I77daab80cfabb56d51c3ea6b1d14bd9b9fbc577c	5 years ago
Alexander Traud	7a04947abd	BuildSystem: Allow space in path. ... ASTERISK-28818 Change-Id: Ib7f246896457d9e3b14d7f5199136d6545ce0b6f	5 years ago
Jaco Kroon	f824cd6a13	build: search from newest to oldest for gmime. ... We (Gentoo distribution) reckon that in the case of multiple versions of gmime installed we should prefer the newest one. Change-Id: Idf7be613230232eb1d573d93c4a5a8297f4ecd2d	5 years ago
Sebastian Kemper	b7fbb9c41f	check_expr2: fix cross-compile/hardening issues ... When building check_expr2 with ASLR PIE hardening enabled the linker fails. This is resolved by adding the regular compiler flags when building the object files from ast_expr2f.c and ast_expr2.c. Note: The STANDALONE define is removed because it is already defined in _ASTCFLAGS. YY_NO_INPUT is defined so that the compile survives '--enable-dev-mode'. Also, a Makefile variable "CROSS_COMPILING" is added so that the build system doesn't try to run check_expr2 when cross-compiling, because that will fail the build as will. ASTERISK-28685 #close Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Change-Id: If435b7db9f9ad8266245bda51c81c220f9658915	5 years ago
Ben Ford	168637cc0c	RTP/ICE: Send on first valid pair. ... When handling ICE negotiations, it's possible that there can be a delay between STUN binding requests which in turn will cause a delay in ICE completion, preventing media from flowing. It should be possible to send media when there is at least one valid pair, preventing this scenario from occurring. A change was added to PJPROJECT that adds an optional callback (on_valid_pair) that will be called when the first valid pair is found during ICE negotiation. Asterisk uses this to start the DTLS handshake, allowing media to flow. It will only be called once, either on the first valid pair, or when ICE negotiation is complete. ASTERISK-28716 Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867	5 years ago
Joshua C. Colp	ed394ce5b1	configure: Add check for MySQL client bool and my_bool type usage. ... Instead of trying to use the defined MySQL client version from the header use a configure check to determine whether the bool or my_bool type should be used for defining a boolean. ASTERISK-28604 Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7	5 years ago
Joshua Colp	a8e5cf557d	res_rtp_asterisk: Add support for DTLS packet fragmentation. ... This change adds support for larger TLS certificates by allowing OpenSSL to fragment the DTLS packets according to the configured MTU. By default this is set to 1200. This is accomplished by implementing our own BIO method that supports MTU querying. The configured MTU is returned to OpenSSL which fragments the packet accordingly. When a packet is to be sent it is done directly out the RTP instance. ASTERISK-28018 Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06	6 years ago
Sebastian Kemper	ccac55b894	loader: support for permanent dlopen() ... Asterisk assumes that dlopen() will always run the constructor of a shared library and every dlclose() will run its destructor. But dlopen() may be permanent, meaning the constructor will only be run once, as is the case with musl libc. With a permanent dlopen() the Asterisk module loader does not work correctly, because it's expectations regarding when the constructors and destructors are run are not met. In fact a segmentation fault will occur when the first module is "re-opened" that has AST_MODFLAG_GLOBAL_SYMBOLS set (the dlopen() does not call the constructor, resource_being_loaded is not set to NULL, then strlen is called with NULL instead of a string, see issue ASTERISK-28319). This commit adds code to the loader that will manually run the constructors/destructors of the (non-builtin) modules where needed. To achieve this a new ao2 container (linked list) is started and filled with objects that contain the names of the modules and the pointers to their respective info structs. This behavior can be activated when configuring Asterisk (--enable-permanent-dlopen). By default this is disabled, of course. ASTERISK-28319 #close Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Change-Id: I86693a0ecf25d5ba81c73773a03df4abc3426875	6 years ago
Jean Aunis	d9fae4a824	build : Fix cross-compilation errors ... Bundled pjproject and jansson must be configured with the host and build parameters provided to the configure script. Autotools do not permit to check for the existence of local header files, so the control of hrirs.h must not be done when cross-compiling. ASTERISK-28250 Change-Id: If0a76e52a87d4ab82b7d4c72d27d8759ca931880	6 years ago
Sean Bright	6d69fb3cc2	utils: Wrap socket() and pipe() to reduce syscalls ... Some platforms provide an implementation of socket() and pipe2() that allow the caller to specify that the resulting file descriptors should be non-blocking. Using these allows us to potentially elide 3 calls into 1 by avoiding extraneous calls to fcntl() to set the O_NONBLOCK flag afterwards. In passing, change ast_alertpipe_init() to use pipe2() directly instead of the wrapper if it is available. Change-Id: I3ebe654fb549587537161506c6c950f4ab298bb0	6 years ago
Chris-Savinovich	58e50e56cb	core: Merge malloc_trim patch ... We've had multiple opportunities where Richard Mudgett's malloc_trim patch has been useful. Let's get it pushed up to gerrit and merged. Since malloc_trim is only available in libc, an entry is added to configure.ac to create a definition for HAVE_MALLOC_TRIM. Change-Id: Ia38308c550149d9d6eae4ca414a649957de9700c	6 years ago
Nick French	37b2e68628	res_pjsip: Implement additional SIP RFCs for Google Voice trunk compatability ... This change implements a few different generic things which were brought on by Google Voice SIP. 1. The concept of flow transports have been introduced. These are configurable transports in pjsip.conf which can be used to reference a flow of signaling to a target. These have runtime configuration that can be changed by the signaling itself (such as Service-Routes and P-Preferred-Identity). When used these guarantee an individual connection (in the case of TCP or TLS) even if multiple flow transports exist to the same target. 2. Service-Routes (RFC 3608) support has been added to the outbound registration module which when received will be stored on the flow transport and used for requests referencing it. 3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been added to the outbound registration module. If a P-Associated-URI header is received it will be used on requests as the P-Preferred-Identity. 4. Configurable outbound extension support has been added to the outbound registration module. When set the extension will be placed in the Supported header. 5. Header parameters can now be configured on an outbound registration which will be placed in the Contact header. 6. Google specific OAuth / Bearer token authentication (draft-ietf-sipcore-sip-authn-02) has been added to the outbound registration module. All functionality changes are controlled by pjsip.conf configuration options and do not affect non-configured pjsip endpoints otherwise. ASTERISK-27971 #close Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58	7 years ago
Joshua Colp	02bb329bb5	Merge "configure.ac: Check for unbound version >= 1.5"	7 years ago
George Joseph	1ba51b00cc	configure.ac: Check for unbound version >= 1.5 ... In order to do this and provide good feedback, a new macro was created (AST_EXT_LIB_EXTRA_CHECK) which does the normal check and path setups for the library then compiles, links and runs a supplied code fragment to do the final determination. In this case, the final code fragment compares UNBOUND_VERSION_MAJOR and UNBOUND_VERSION_MINOR to determine if they're greater than or equal to 1.5. Since we require version 1.5, some code in res_resolver_unbound was also simplified. ASTERISK-28045 Reported by: Samuel Galarneau Change-Id: Iee94ad543cd6f8b118df8c4c7afd9c4e2ca1fa72	7 years ago
Kevin Harwell	31fba4e869	rtp_engine: rtcp_report_to_json can overflow the ssrc integer value ... When writing an RTCP report to json the code attempts to pack the "ssrc" and "source_ssrc" unsigned integer values as a signed int value type. This of course means if the ssrc's unsigned value is greater than that which can fit into a signed integer value it gets converted to a negative number. Subsequently, the negative value goes out in the json report. This patch now packs the value as a json_int_t, which is the widest integer type available on a given system. This should make it so the value no longer overflows. Note, this was caught by two failing tests hep/rtcp-receiver/ and hep/rtcp-sender. Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0	7 years ago
Joshua Colp	ce9a980be6	pjproject: Upgrade to 2.8. ... This change brings in PJSIP 2.8, removes all the patches that were merged upstream, and makes a minor change to support a breaking change that was done. ASTERISK-28059 Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189	7 years ago
Sean Bright	3d9deb35f0	autoconf: Check for srtp_get_version_string() before using it ... Change-Id: Id2a916ff9448706090e72ff2c7fb3f5ba24a05df	7 years ago
Corey Farrell	a2001c00e6	Create --disable-binary-modules option. ... This new option can be passed for ./configure or ./tests/CI/buildAsterisk.sh to prevent download/install of binary modules. Normally enabling the categories MENUSELECT_CODECS or MENUSELECT_RES will result in binary modules being enabled even if the build target is incompatible with those modules. This includes CI scripts which enable categories before disabling specific modules. If more binary modules are offered in the future this will help avoid accidentally downloading them if unwanted or incompatible. Adding a binary module will only require creating a new menuselect entry similar to the existing ones, it will not be necessary to modify the CI scripts. Change-Id: I6b1bd1c75a2e48f05b8b8a45b7a7a2d00a079166	7 years ago
Alexander Traud	0a4d58735f	BuildSystem: Enable Jansson in Solaris 11. ... In Solaris, the header <jansson.h> is in /usr/include/jansson. To find Jansson even in such a subdirectory, the tool pkg-config is queried via AST_PKG_CONFIG_CHECK. For those platforms, which do not list Jansson via pkg-config, the previous check remains and is executed thereafter. Because the check for the NetBSD Editline library uses the tool pkg-config the code of PKG_PROG_PKG_CONFIG must be used. Because that check happens earlier than Jansson, it must be placed in front of that. ASTERISK-27991 Change-Id: I69ea0f379f87a50049654b2487c76ee1c04fa53a	7 years ago
Corey Farrell	ee154464d7	Enable bundling of jansson, require 2.11. ... Change-Id: Ib3111b151d37cbda40768cf2a8a9c6cf6c5c7cbd	7 years ago
Alexander Traud	804d931f27	bridge_softmix_binaural: Enable FFTW3 in Solaris 11. ... ASTERISK-27939 Change-Id: Ice5640e08385a64a0a6555deaccd91e86bca154f	7 years ago
George Joseph	880fbff6b7	res_pjsip_session: Add ability to accept multiple sdp answers ... pjproject by default currently will follow media forked during an INVITE on outbound calls if the To tag is different on a subsequent response as that on an earlier response. We handle this correctly. There have been reported cases where the To tag is the same but we still need to follow the media. The pjproject patch in this commit adds the capability to sip_inv and also adds the capability to control it at runtime. The original "different tag" behavior was always controllable at runtime but we never did anything with it and left it to default to TRUE. So, along with the pjproject patch, this commit adds options to both the system and endpoint objects to control the two behaviors, and a small logic change to session_inv_on_media_update in res_pjsip_session to control the behavior at the endpoint level. The default behavior for "different tags" remains the same at TRUE and the default for "same tag" is FALSE. Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6 ASTERISK-27936 Reported-by: Ross Beer	7 years ago
Alexander Traud	b01fc2ef3d	res_rtp_asterisk: Instead of ./configure use OPENSSL_NO_SRTP. ... Previously, Asterisk used its script ./configure, to test whether OpenSSL was built with no-srtp (or was simply too old). However, the header file <openssl/opensslconf.h> is the preferred way to detect the local configuration of OpenSSL. As a positive side-effect the script ./configure does not interleave the detection of the Open Settlement Protocol Toolkit (OSPTK) with the detection of individual features of OpenSSL anymore. Change-Id: I3c77c7b00b2ffa2e935632097fa057b9fdf480c0	7 years ago
Alexander Traud	0743ad6422	res_rtp_asterisk: Allow OpenSSL configured with no-deprecated. ... Furthermore, allow OpenSSL configured with no-dh. Additionally, this change allows auto-negotiation of the elliptic curve/group for servers, not only with OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer. This enables X25519 (since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a side-effect. ASTERISK-27910 Change-Id: I5b0dd47c5194ee17f830f869d629d7ef212cf537	7 years ago
Alexander Traud	2228ae3f27	tcptls: Repair ./configure --with-ssl=PATH. ... SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 got discovered without honoring a PATH. ASTERISK-27865 Change-Id: I8cd358eed7411726d08fa7b01691bef122fbeb71	7 years ago
Corey Farrell	b5914d90ac	Fix GCC 8 build issues. ... This fixes build warnings found by GCC 8. In some cases format truncation is intentional so the warning is just suppressed. ASTERISK-27824 #close Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84	7 years ago
George Joseph	3bad41257b	Merge "BuildSystem: Add DragonFly BSD."	7 years ago
Alexander Traud	fe072f4405	BuildSystem: Enable IMAP storage on FreeBSD and DragonFly BSD. ... ASTERISK-27639 Change-Id: I1347f3f2f3737010d0a80a5c30b5aaf71cf3ccb0	7 years ago
Alexander Traud	efe40ff671	BuildSystem: Add DragonFly BSD. ... ASTERISK-27820 Change-Id: I310896143e94d65da1c2be3bb448204a8b86d557	7 years ago