4181 Commits (18.0)

Author	SHA1	Message	Date
Ben Ford	7d33320cbe	AST-2020-002 - res_pjsip: Stop sending INVITEs after challenge limit. ... If Asterisk sends out an INVITE and receives a challenge with a different nonce value each time, it will continuously send out INVITEs, even if the call is hung up. The endpoint must be configured for outbound authentication for this to occur. A limit has been set on outbound INVITEs so that, once reached, Asterisk will stop sending INVITEs and the transaction will terminate. ASTERISK-29013 Change-Id: I2d001ca745b00ca8aa12030f2240cd72363b46f7	5 years ago
Kevin Harwell	eed50a17e5	AST-2020-001 - res_pjsip: Return dialog locked and referenced ... pjproject returns the dialog locked and with a reference. However, in Asterisk the method that handles this decrements the reference and removes the lock prior to returning. This makes it possible, under some circumstances, for another thread to free said dialog before the thread that created it attempts to use it again. Of course when the thread that created it tries to use a freed dialog a crash can occur. This patch makes it so Asterisk now returns the newly created dialog both locked, and with an added reference. This allows the caller to de-reference, and unlock the dialog when it is safe to do so. In the case of a new SIP Invite the lock, and reference are now held for the entirety of the new invite handling process. Otherwise it's possible for the dialog, or its dependent objects, like the transaction, to disappear. For example if there is a TCP transport error. ASTERISK-29057 #close Change-Id: I5ef645a47829596f402cf383dc02c629c618969e (cherry picked from commit 6baa4b53be)	5 years ago
Kevin Harwell	ec03909831	conversions: Add string to signed integer conversion functions ... Change-Id: Id603b0b03b78eb84c7fca030a08b343c0d5973f9	5 years ago
Sean Bright	5ec7099312	bridge_channel: Ensure text messages are zero terminated ... T.140 data in RTP is not zero terminated, so when we are queuing a text frame on a bridge we need to ensure that we are passing a zero terminated string. ASTERISK-28974 #close Change-Id: Ic10057387ce30b2094613ea67e3ae8c5c431dda3	5 years ago
George Joseph	c4c72d55a2	scope_trace: Added debug messages and added additional macros ... The SCOPE_ENTER and SCOPE_EXIT* macros now print debug messages at the same level as the scope level. This allows the same messages to be printed to the debug log when AST_DEVMODE isn't enabled. Also added a few variants of the SCOPE_EXIT macros that will also call ast_log instead of ast_debug to make it easier to use scope tracing and still print error messages. Change-Id: I7fe55f7ec28069919a0fc0b11a82235ce904cc21	5 years ago
George Joseph	d26ab7f8f9	stream.c: Added 2 more debugging utils and added pos to stream string ... * Added ast_stream_to_stra and ast_stream_topology_to_stra() macros which are shortcuts for ast_str_tmp(256, ast_stream_to_str(stream, &STR_TMP)) * Added the stream position to the string representation of the stream. * Fixed some formatting in ast_stream_to_str(). Change-Id: Idaf4cb0affa46d4dce58a73a111f35435331cc4b	5 years ago
George Joseph	6faf76308d	ACN: Changes specific to the core ... Allow passing a topology from the called channel back to the calling channel. * Added a new function ast_queue_answer() that accepts a stream topology and queues an ANSWER CONTROL frame with it as the data. This allows the called channel to indicate its resolved topology. * Added a new virtual function to the channel tech structure answer_with_stream_topology() that allows the calling channel to receive the called channel's topology. Added ast_raw_answer_with_stream_topology() that invokes that virtual function. * Modified app_dial.c and features.c to grab the topology from the ANSWER frame queued by the answering channel and send it to the calling channel with ast_raw_answer_with_stream_topology(). * Modified frame.c to automatically cleanup the reference to the topology on ANSWER frames. Added a few debugging messages to stream.c. Change-Id: I0115d2ed68d6bae0f87e85abcf16c771bdaf992c	5 years ago
Sean Bright	da8a617dc9	vector.h: Fix implementation of AST_VECTOR_COMPACT() for empty vectors ... The assumed behavior of realloc() - that it was effectively a free() if its second argument was 0 - is Linux specific behavior and is not guaranteed by either POSIX or the C specification. Instead, if we want to resize a vector to 0, do it explicitly. Change-Id: Ife31d4b510ebab41cb5477fdc7ea4e3138ca8b4f	6 years ago
Ben Ford	769a9611e7	utils.c: NULL terminate ast_base64decode_string. ... With the addition of STIR/SHAKEN, the function ast_base64decode_string was added for convenience since there is a lot of converting done during the STIR/SHAKEN process. This function returned the decoded string for you, but did not NULL terminate it, causing some issues (specifically with MALLOC_DEBUG). Now, the returned string is NULL terminated, and the documentation has been updated to reflect this. Change-Id: Icdd7d05b323b0c47ff6ed43492937a03641bdcf5	6 years ago
George Joseph	802aa97fa0	ACN: Configuration renaming for pjsip endpoint ... This change renames the codec preference endpoint options. incoming_offer_codec_prefs becomes codec_prefs_incoming_offer to keep the options together when showing an endpoint. Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d	6 years ago
Sean Bright	d9ae902f52	utf8.c: Add UTF-8 validation and utility functions ... There are various places in Asterisk - specifically in regards to database integration - where having some kind of UTF-8 validation would be beneficial. This patch adds: * Functions to validate that a given string contains only valid UTF-8 sequences. * A function to copy a string (similar to ast_copy_string) stopping when an invalid UTF-8 sequence is encountered. * A UTF-8 validator that allows for progressive validation. All of this is based on the excellent UTF-8 decoder by Björn Höhrmann. More information is available here: https://bjoern.hoehrmann.de/utf-8/decoder/dfa/ The API was written in such a way that should allow us to replace the implementation later should we determine that we need something more comprehensive. Change-Id: I3555d787a79e7c780a7800cd26e0b5056368abf9	6 years ago
Sean Bright	9022f35f09	vector.h: Add AST_VECTOR_SORT() ... Allows a vector to be sorted in-place, rather than only during insertion. Change-Id: I22cba9ddf556a7e44dacc53c4431bd81dd2fa780	6 years ago
Ben Ford	5fbed5af24	res_stir_shaken: Add stir_shaken option and general improvements. ... Added a new configuration option for PJSIP endpoints - stir_shaken. If set to yes, then STIR/SHAKEN support will be added to inbound and outbound INVITEs. The default is no. Alembic has been updated to include this option. Previously the dialplan function was not trimming the whitespace from the parameters it recieved. Now it does. Also added a conditional that, when TEST_FRAMEWORK is enabled, the timestamp in the identity header will be overlooked. This is just for testing, since the testsuite will rely on a SIPp scenario with a preset identity header to trigger the MISMATCH result. Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1	6 years ago
George Joseph	9bd1d686a1	ACN: Add tracing to existing code ... Prior to making any modifications to the pjsip infrastructure for ACN, I've added the tracing functions to the existing code. This should make the final commit easier to review, but we can also now run a "before and after" trace. No functional changes were made with this commit. Change-Id: Ia83a1a2687ccb96f2bc8a2a3928a5214c4be775c	6 years ago
George Joseph	2d22e34206	ACN: res_pjsip endpoint options ... This commit adds the endpoint options required to control Advanced Codec Negotiation. incoming_offer_codec_prefs outgoing_offer_codec_prefs incoming_answer_codec_prefs outgoing_answer_codec_prefs The documentation may need tweaking and some additional edits added, especially for the "answer" prefs. That'll be handled when things finalize. This commit is safe to merge as it doens't alter any existing functionality nor does it alter the previous codec negotiation work which may now be obsolete. Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11	6 years ago
George Joseph	d093e44b1e	frame.c: Make debugging easier ... * ast_frame_subclass2str() and ast_frame_type2str() now return a pointer to the buffer that was passed in instead of void. This makes it easier to use these functions inline in printf-style debugging statements. * Added many missing control frame entries in ast_frame_subclass2str. Change-Id: Ifd0d6578e758cd644c96d17a5383ff2128c572fc	6 years ago
George Joseph	955b7b4fdb	Scope Trace: Make it easier to trace through synchronous tasks ... Tracing through synchronous tasks was a little troublesome because the new thread's stack counter reset to 0. This change allows a synchronous task to set its trace level to be the same as the thread that pushed the task. For now, the task's level has to be passed in the task's data structure but a future enhancement to the taskprocessor subsystem could automatically set the trace level of the servant to be that of the caller. This doesn't really make sense for async tasks because you never know when they're going to run anyway. Change-Id: Ib8049c0b815063a45d8c7b0cb4e30b7b87b1d825	6 years ago
Kevin Harwell	cfed0ea033	manager - Add Content-Type parameter to the SendText action ... This patch allows a user of AMI to now specify the type of message content contained within by setting the 'Content-Type' parameter. Note, the AMI version has been bumped for this change. ASTERISK-28945 #close Change-Id: Ibb5315702532c6b954e1498beddc8855fabdf4bb	6 years ago
George Joseph	8d1064eaaf	Streams: Add features for Advanced Codec Negotiation ... The Streams API becomes the home for the core ACN capabilities. These include... * Parsing and formatting of codec negotation preferences. * Resolving pending streams and topologies with those configured using configured preferences. * Utility functions for creating string representations of streams, topologies, and negotiation preferences. For codec negotiation preferences: * Added ast_stream_codec_prefs_parse() which takes a string representation of codec negotiation preferences, which may come from a pjsip endpoint for example, and populates a ast_stream_codec_negotiation_prefs structure. * Added ast_stream_codec_prefs_to_str() which does the reverse. * Added many functions to parse individual parameter name and value strings to their respectrive enum values, and the reverse. For streams: * Added ast_stream_create_resolved() which takes a "live" stream and resolves it with a configured stream and the negotiation preferences to create a new stream. * Added ast_stream_to_str() which create a string representation of a stream suitable for debug or display purposes. For topology: * Added ast_stream_topology_create_resolved() which takes a "live" topology and resolves it, stream by stream, with a configured topology stream and the negotiation preferences to create a new topology. * Added ast_stream_topology_to_str() which create a string representation of a topology suitable for debug or display purposes. * Renamed ast_format_caps_from_topology() to ast_stream_topology_get_formats() to be more consistent with the existing ast_stream_get_formats(). Additional changes: * A new function ast_format_cap_append_names() appends the results to the ast_str buffer instead of replacing buffer contents. Change-Id: I2df77dedd0c72c52deb6e329effe057a8e06cd56	6 years ago
George Joseph	7440fd0397	Scope Trace: Add some new tracing macros and an ast_str helper ... Created new SCOPE_ functions that don't depend on RAII_VAR. Besides generating less code, the use of the explicit SCOPE_EXIT macros capture the line number where the scope exited. The RAII_VAR versions can't do that. * SCOPE_ENTER(level, ...): Like SCOPE_TRACE but doesn't use RAII_VAR and therefore needs needs one of... * SCOPE_EXIT(...): Decrements the trace stack counter and optionally prints a message. * SCOPE_EXIT_EXPR(__expr, ...): Decrements the trace stack counter, optionally prints a message, then executes the expression. SCOPE_EXIT_EXPR(break, "My while got broken\n"); * SCOPE_EXIT_RTN(, ...): Decrements the trace stack counter, optionally prints a message, then returns without a value. SCOPE_EXIT_RTN("Bye\n"); * SCOPE_EXIT_RTN_VALUE(__return_value, ...): Decrements the trace stack counter, optionally prints a message, then returns the value specified. SCOPE_EXIT_RTN_VALUE(rc, "Returning with RC: %d\n", rc); Create an ast_str helper ast_str_tmp() that allocates a temporary ast_str that can be passed to a function that needs it, then frees it. This makes using the above macros easier. Example: SCOPE_ENTER(1, Format Caps 1: %s Format Caps 2: %s\n", ast_str_tmp(32, ast_format_cap_get_names(cap1, &STR_TMP), ast_str_tmp(32, ast_format_cap_get_names(cap2, &STR_TMP)); The calls to ast_str_tmp create an ast_str of the specified initial length which can be referenced as STR_TMP. It then calls the expression, which must return a char *, ast_strdupa's it, frees STR_TMP, then returns the ast_strdupa'd string. That string is freed when the function returns. Change-Id: I44059b20d55a889aa91440d2f8a590865998be51	6 years ago
Ben Ford	1274117102	res_stir_shaken: Add outbound INVITE support. ... Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is sent, the caller ID will be checked to see if there is a certificate that corresponds to it. If so, that information will be retrieved and an Identity header will be added to the SIP message. The format is: header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken Header, payload, and signature are all BASE64 encoded. The public key URL is retrieved from the certificate. Currently the algorithm and ppt are ES256 and shaken, respectively. This message is signed and can be used for verification on the receiving end. Two new configuration options have been added to the certificate object: attestation and origid. The attestation is required and must be A, B, or C. origid is the origination identifier. A new utility function has been added as well that takes a string, allocates space, BASE64 encodes it, then returns it, eliminating the need to calculate the size yourself. Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4	6 years ago
Kevin Harwell	415b55af5a	pjproject: Upgrade bundled version to pjproject 2.10 ... This patch makes the usual necessary changes when upgrading to a new version pjproject. For instance, version number bump, patches removed from third-party, new *.md5 file added, etc.. This patch also includes a change to the Asterisk pjproject Makefile to explicitly create the 'source/pjsip-apps/lib' directory. This directory is no longer there by default so needs to be added so the Asterisk malloc debug can be built. This patch also includes some minor changes to Asterisk that were a result of the upgrade. Specifically, there was a backward incompatibility change made in 2.10 that modified the "expires header" variable field from a signed to an unsigned value. This potentially effects comparison. Namely, those check for a value less than zero. This patch modified a few locations in the Asterisk code that may have been affected. Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to check a minimum version of pjproject at compile time. ASTERISK-28899 #close Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81	6 years ago
Joshua C. Colp	de2813cf23	core_unreal / core_local: Add multistream and re-negotiation. ... When requesting a Local channel the requested stream topology or a converted stream topology will now be placed onto the resulting channels. Frames written in on streams will now also preserve the stream identifier as they are queued on the opposite channel. Finally when a stream topology change is requested it is immediately accepted and reflected on both channels. Each channel also receives a queued frame to indicate that the topology has changed. ASTERISK-28938 Change-Id: I4e9d94da5230d4bd046dc755651493fce1d87186	6 years ago
Kevin Harwell	3d1bf3c537	Compiler fixes for gcc 10 ... This patch fixes a few compile warnings/errors that now occur when using gcc 10+. Also, the Makefile.rules check to turn off partial inlining in gcc versions greater or equal to 8.2.1 had a bug where it only it only checked against versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures any version above the specified version is correctly compared. Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9	6 years ago
Ben Ford	3927f79cb5	res_stir_shaken: Add inbound INVITE support. ... Integrated STIR/SHAKEN support with incoming INVITES. Upon receiving an INVITE, the Identity header is retrieved, parsing the message to verify the signature. If any of the parsing fails, AST_STIR_SHAKEN_VERIFY_NOT_PRESENT will be added to the channel for this caller ID. If verification itself fails, AST_STIR_SHAKEN_VERIFY_SIGNATURE_FAILED will be added. If anything in the payload does not line up with the SIP signaling, AST_STIR_SHAKEN_VERIFY_MISMATCH will be added. If all of the above steps pass, then AST_STIR_SHAKEN_VERIFY_PASSED will be added, completing the verification process. A new config option has been added to the general section for stir_shaken.conf. "signature_timeout" is the amount of time a signature will be considered valid. If an INVITE is received and the amount of time between when it was received and when it was signed is greater than signature_timeout, verification will fail. Some changes were also made to signing and verification. There was an error where the whole JSON string was being signed rather than the header combined with the payload. This has been changed to sign the correct thing. Verification has been changed to do this as well, and the unit tests have been updated to reflect these changes. A couple of utility functions have also been added. One decodes a BASE64 string and returns the decoded string, doing all the length calculations for you. The other retrieves a string value from a header in a rdata object. Change-Id: I855f857be3d1c63b64812ac35d9ce0534085b913	6 years ago
George Joseph	ca3c22c5f1	Scope Tracing: A new facility for tracing scope enter/exit ... What's wrong with ast_debug? ast_debug is fine for general purpose debug output but it's not really geared for scope tracing since it doesn't present its output in a way that makes capturing and analyzing flow through Asterisk easy. How is scope tracing better? Scope tracing uses the same "cleanup" attribute that RAII_VAR uses to print messages to a separate "trace" log level. Even better, the messages are indented and unindented based on a thread-local call depth counter. When output to a separate log file, the output is uncluttered and easy to follow. Here's an example of the output. The leading timestamps and thread ids are removed and the output cut off at 68 columns for commit message restrictions but you get the idea. --> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 --> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 --> res_pjsip_session.c:3669 handle_incoming_response PJSIP/ --> chan_pjsip.c:3265 chan_pjsip_incoming_response_after --> chan_pjsip.c:3194 chan_pjsip_incoming_response P chan_pjsip.c:3245 chan_pjsip_incoming_respon <-- chan_pjsip.c:3194 chan_pjsip_incoming_response P <-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after <-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/ <-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 <-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 The messages with the "-->" or "<--" were produced by including the following at the top of each function: SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session)); Scope isn't limited to functions any more than RAII_VAR is. You can also see entry and exit from "if", "for", "while", etc blocks. There is also an ast_trace() macro that doesn't track entry or exit but simply outputs a message to the trace log using the current indent level. The deepest message in the sample (chan_pjsip.c:3245) was used to indicate which "case" in a "select" was executed. How do you use it? More documentation is available in logger.h but here's an overview: * Configure with --enable-dev-mode. Like debug, scope tracing is #ifdef'd out if devmode isn't enabled. * Add a SCOPE_TRACE() call to the top of your function. * Set a logger channel in logger.conf to output the "trace" level. * Use the CLI (or cli.conf) to set a trace level similar to setting debug level... CLI> core set trace 2 res_pjsip.so Summary Of Changes: * Added LOG_TRACE logger level. Actually it occupies the slot formerly occupied by the now defunct "event" level. * Added core asterisk option "trace" similar to debug. Includes ability to specify global trace level in asterisk.conf and CLI commands to turn on/off and set levels. Levels can be set globally (probably not a good idea), or by module/source file. * Updated sample asterisk.conf and logger.conf. Tracing is disabled by default in both. * Added __ast_trace() to logger.c which keeps track of the indent level using TLS. It's #ifdef'd out if devmode isn't enabled. * Added ast_trace() and SCOPE_TRACE() macros to logger.h. These are all #ifdef'd out if devmode isn't enabled. Why not use gcc's -finstrument-functions capability? gcc's facility doesn't allow access to local data and doesn't operate on non-function scopes. Known Issues: The only know issue is that we currently don't know the line number where the scope exited. It's reported as the same place the scope was entered. There's probably a way to get around it but it might involve looking at the stack and doing an 'addr2line' to get the line number. Kind of like ast_backtrace() does. Not sure if it's worth it. Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027	6 years ago
Ben Ford	e29df34de0	res_stir_shaken: Added dialplan function and API call. ... Adds the "STIR_SHAKEN" dialplan function and an API call to add a STIR_SHAKEN verification result to a channel. This information will be held in a datastore on the channel that can later be queried through the "STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results including identity, attestation, and verify_result. Here are some examples: STIR_SHAKEN(count) STIR_SHAKEN(0, identity) STIR_SHAKEN(1, attestation) STIR_SHAKEN(2, verify_result) Getting the count can be used to iterate through the results and pull information by specifying the index and the field you want to retrieve. Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82	6 years ago
Nathan Bruning	f217fcdc62	app_queue: track masquerades in app_queue to avoid leaked stasis subscriptions ... Add a new "masquarade" channel event, and use it in app_queue to track unique id's. Testcase is submitted as https://gerrit.asterisk.org/c/testsuite/+/14210 ASTERISK-28829 #close ASTERISK-25844 #close Change-Id: Ifc5f9f9fd70903f3c6e49738d3bc632b085d2df6	6 years ago
Ben Ford	9acf840f7c	res_stir_shaken: Implemented signature verification. ... There are a lot of moving parts in this patch, but the focus of it is on the verification of the signature using a public key located at the public key URL provided in the JSON payload. First, we check the database to see if we have already downloaded the key. If so, check to see if it has expired. If it has, redownload from the URL. If we don't have an entry in the database, just go ahead and download the public key. The expiration is tested each time we download the file. After that, read the public key from the file and use it to verify the signature. All sanity checking is done when the payload is first received, so the verification is complete once this point is reached. The XML has also been added since a new config option was added to general (curl_timeout). The maximum amount of time to wait for a download can be configured through this option, with a low value by default. Change-Id: I3ba4c63880493bf8c7d17a9cfca1af0e934d1a1c	6 years ago
Joshua C. Colp	1c5e68580a	stream: Enforce formats immutability and ensure formats exist. ... Some places in Asterisk did not treat the formats on a stream as immutable when they are. The ast_stream_get_formats function is now const to enforce this and parts of Asterisk have been updated to take this into account. Some violations of this were also fixed along the way. An additional minor tweak is that streams are now allocated with an empty format capabilities structure removing the need in various places to check that one is present on the stream. ASTERISK-28846 Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe	6 years ago
Joshua C. Colp	6cfc6ff53c	confbridge: Add support for disabling text messaging. ... When in a conference bridge it may be necessary to have text messages disabled for specific participants or for all. This change adds a configuration option, "text_messaging", which can be used to enable or disable this on the user profile. By default existing behavior is preserved as it defaults to "yes". ASTERISK-28841 Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13	6 years ago
Jean Aunis	de66713fd5	func_volume: Accept decimal number as argument ... Allow voice volume to be multiplied or divided by a floating point number. ASTERISK-28813 Change-Id: I5b42b890ec4e1f6b0b3400cb44ff16522b021c8c	6 years ago
George Joseph	7ba6d43083	test_res_pjsip_session_caps: Create unit test ... This unit test runs through combinations of... * Local codecs * Remote Codecs * Codec Preference * Incoming/Outgoing A few new APIs were created to make it easier to test the functionality but didn't result in any actual functional change. ASTERISK_28777 Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164	6 years ago
George Joseph	2ee455958e	codec_negotiation: Implement outgoing_call_offer_pref ... Based on this new endpoint setting, a joint list of preferred codecs between those received from the Asterisk core (remote), and those specified in the endpoint's "allow" parameter (local) is created and is used to create the outgoing SDP offer. * Add outgoing_call_offer_pref to pjsip_configuration (endpoint) * Add "call_direction" to res_pjsip_session. * Update pjsip_session_caps.c to make the functions more generic so they could be used for both incoming and outgoing. * Update ast_sip_session_create_outgoing to create the pending_media_state->topology with the results of ast_sip_session_create_joint_call_stream(). * The endpoint "preferred_codec_only" option now automatically sets AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref. * A helper function ast_stream_get_format_count() was added to streams to return the current count of formats. ASTERISK-28777 Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437	6 years ago
Ben Ford	57a457c26c	res_stir_shaken: Implemented signing of JSON payload. ... This change provides functions that take in a JSON payload, verify that the contents contain all the mandatory fields and required values (if any), and signs the payload with the private key. Four fields are added to the payload: x5u, attest, iat, and origid. As of now, these are just placeholder values that will be set to actual values once the logic is implemented for what to do when an actual payload is received, but the functions to add these values have all been implemented and are ready to use. Upon successful signing and the addition of those four values, a ast_stir_shaken_payload is returned, containing other useful information such as the algorithm and signature. Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393	6 years ago
Jaco Kroon	d32e559e8a	acl: implement a centralized ACL output mechanism for HAs and ACLs. ... named_acl.c (which is really a named_ha) now uses ast_ha_output. I've also updated main/manager.c to output the actual ACL on "manager show user <username>" if one is set. If this works then we can add similar to other modules as required. Change-Id: I0ec9876a90dddd379c80ec078d48e3ee6991eb0f	6 years ago
Jaco Kroon	6f731f153b	netsock2: compile fixes. ... This fixes ast_addressfamily_to_sockaddrsize to reference the provided argument, and ast_sockaddr_from_sockaddr to not use the name of a structure as argument. Change-Id: Ibf5db469c47c3b4214edf8456326086174e8edd7	6 years ago
Ben Ford	211bb8a79c	res_stir_shaken: Initial commit and reading private key. ... This commit sets up some of the initial framework for the module and adds a way to read the private key from the specified file, which will then be appended to the certificate object. This works fine for now, but eventually some other structure will likely need to be used to store all this information. Similarly, the caller_id_number is specified on the certificate config object, but in the end we will want that information to be tied to the certificate itself and read it from there. A method has been added that will retrieve the private key associated with the caller_id_number passed in. Tab completion for certificates and stores has also been added. Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f	6 years ago
Sean Bright	d68f940f6e	dns_txt: Add TXT record parsing support ... Change-Id: Ie0eca23b8e6f4c7d9846b6013d79099314d90ef5	6 years ago
George Joseph	99efe1f868	Merge "codec negotiation: add incoming_call_offer_prefs option"	6 years ago
Joshua Colp	bdf7b4eeb3	Merge "message & stasis/messaging: make text message variables work in ARI"	6 years ago
Kevin Harwell	06dada3f01	codec negotiation: add incoming_call_offer_prefs option ... Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that specifies the preferred order of codecs after receiving an offer. This patch does the following: Adds a new enumeration, ast_sip_call_codec_pref, used by the the new configuration option that's added to the endpoint media structure. Adds a new ast_sip_session_caps structure that's set for each session media object. Creates a new file, res_pjsip_session_caps that "implements" the new structure and option, and is compiled into the res_pjsip_session library. ASTERISK-28756 #close Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f	6 years ago
Kevin Harwell	f8a852605d	Merge "res/res_pjsip_sdp_rtp: Fix MOH transitions"	6 years ago
Kevin Harwell	a715cf5aaa	message & stasis/messaging: make text message variables work in ARI ... When a text message was received any associated variable was not written to the ARI TextMessageReceived event. This occurred because Asterisk only wrote out "send" variables. However, even those "send" variables would fail ARI validation due to a TextMessageVariable formatting bug. Since it seems the TextMessageReceived event has never been able to include actual variables it was decided to remove the TextMessageVariable object type from ARI, and simply return a JSON object of key/value pairs for variables. This aligns more with how the ARI sendMessage handles variables, and other places in ARI. ASTERISK-28755 #close Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f	6 years ago
Kevin Harwell	d18af40431	Merge "say: Remove unused "plural" option from main/say"	6 years ago
Kevin Harwell	566f9a541f	Merge "format_cap: make function parameters 'const'"	6 years ago
Kevin Harwell	a3b3a9d2dc	Merge "pjsip: Update ACLs on named ACL changes."	6 years ago
Torrey Searle	77c9ba8e63	res/res_pjsip_sdp_rtp: Fix MOH transitions ... Update the state of remote_hold immediately on receipt of remote SDP so that the information is available when building the SDP answer ASTERISK-28754 #close Change-Id: I7026032a807e9c95081cb8f060400b05deb4836f	6 years ago
Kevin Harwell	1e1651b4f4	format_cap: make function parameters 'const' ... There were a couple places where the format cap function parameter was not 'const' when it should have been. This patch makes them 'const'. Change-Id: Ife753fb16a962d842a6b44f45363a61a66bfdb2e	6 years ago
Walter Doekes	0b5c6fddf1	say: Remove unused "plural" option from main/say ... There are exceptions for plural objects, but they are detected using the supplied NUMBER, not using an extra option. Change-Id: I95d1d1b2796b1aba92048a2dbae8a3856ed8a113	6 years ago